ricoo F0344 Universal TV Wall Mount Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo F0344 Universal TV Wall Mount Instruction Manual
Assembly Instructions
Warning: Do not exceed listed load weight. Property damage oder serious injury may occur!
MAX 50kg 110lbs
Please check BEFORE installation distance between VESA mounting holes on your display!
This screen mount supports VESA hole distance in the minimum and maximum distance ranges given above.
VESA – Hole distance = Distances between the mounting holes on the screen back.
Scope of delivery
We recommend using a professional level.
The numbering on the plastic bag may differ / missing completely!
NOTE: READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND ASSEMBLY
Please note: Images in these assembly instructions are only technical
presentation of the product. Actual product design may vary minimally.
Do not begin the installation until you have read and understood all the
instructions and warnings contained in this installation sheet. If you have
any questions regarding any of the instructions or warnings, please contact
your local distributor. This product was designed to be installed and used
ONLY as specified in this manual. Improper installation of this product may
cause damage or serious injury. This product may only be assembled / installed
by the technical staff. Make sure that the supporting surface will safely
support the combined weight of the equipment and all attached hardware and
components. Always use an assistant or mechanical lifting equipment to safely
lift and position the equipment.
Make sure that before and after the installation of the product neither you
nor somebody else can be injured and other objects can be damaged. In case of
doubt request for help from an expert. This product is intended for indoor use
only. Using this product outdoors could lead to product failure and personal
injury. Tighten screws firmly, but do not over tighten. Over tightening can
cause damage the items, this greatly reduces their holding power.
By reason of large television construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types.
Each wall is built up of different materials which can result a special requirement. Therefore we are concentrated on the delivery of installation materials only for mass concrete walls. Use our included installation accessories only for mass concrete walls.
When mounting on the wooden beams wall, make sure that the fastening screws are anchored in the center of the beams. It is highly recommended to use a beamfinder. If your walls have a special demand of materials, we advise you to ask in an expert shop for a suitable acquirement of the installation materials.
For mounting on the solid concrete wall
Warning: Supplied plastic anchors are only suitable for solid concrete walls!
For mounting on the wooden beam wall
For displays with curved back
Use the matching screws and spacers for your display.
For displays with flat back
Use the matching screws and spacers for your display
If the screws “M-D, M-E, M-F” are too long, use the plastic spacers “M-I, M-J”. (like in Step 2 A)
