ricoo N3042 Tiltable TV Wall Mount Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo N3042 Tiltable TV Wall Mount
Product Information
- Product Name: N3042
- Manufacturer: E.N.Z. Engineering GmbH
- Address: Salzmatten 6, 79341 Kenzingen (Germany)
- Email: support@ricoo.de
- Website: www.ricoo.eu –
- Maximum Load Weight: 30kg (66lbs)
- Supported VESA Hole Distance: Minimum – 100mm x 100mm, Maximum – 400mm x 200mm
Product Usage Instructions
- Before installation, check the distance between the VESA mounting holes on your display.
- Ensure that the VESA hole distance of your display falls within the minimum and maximum ranges specified above.
- Use the included installation accessories only for mass concrete walls.
- Note that the supplied plastic anchors are suitable only for solid concrete walls.
- If the screws M-C, M-D, M-E are too long, use the plastic spacers M-H, M-I as shown in Step 3A. Please refer to the user manual for detailed instructions and illustrations on the assembly process.
MAX 30kg 66lbs
Warning: Do not exceed listed load weight. Property damage oder serious injury may occur!
Dear customer,
we are pleased that you have decided for a product of the brand “RICOO”.
Sometimes, despite our efforts to provide you with a high-quality product, it
may happen that an accessory is missing or a part is damaged during transport.
Please do not return the item
in such a case, simply request replacement for the missing or damaged part at
our customer hotline. Contact details from our customer hotline are listed
below.
When contacting us, please mention the article data (listed on top), article
color as well as the required spare part numbers (including the required
quantity of items), as indicated in the “Scope of delivery” section of this
manual.
Please keep ready your order number/order ID for our customer hotline. We will
process your request immediately!
Scope of delivery
We recommend using a professional level
Please check BEFORE installation distance between VESA mounting holes on your display!
This screen mount supports VESA hole distance in the minimum and maximum distance ranges given above.
VESA – Hole distance = Distances between the mounting holes on the screen back.
NOTE : Read the entire instruction manual before you start installation and assembly
- Please note: Images in these assembly instructions are only technical presentation of the product. Actual product design may vary minimally.
- Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
- This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
- This product may only be assembled/installed by the technical staff.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- When mounting on the wooden beams wall, make sure that the fastening screws are anchored in the center of the beams. It is highly recommended to use a beamfinder.
- Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
- Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage the items, this greatly reduces their holding power.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- By reason of large television construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types.
- Each wall is built up of different materials which can result a special requirement. Therefore we are concentrated on the delivery of installation materials only for mass concrete walls. Use our included installation accessories only for mass concrete walls.
- If your walls have a special demand of materials, we advise you to ask in an expert shop for a suitable acquirement of the installation materials.
- Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert.
- Make also sure that you and optionally the co-helper or representatives have registered the mounting instructions before the installation and also the warning notice.
ASSEMBLY INSTRUCTION
E-Mail: support@ricoo.de
www.ricoo.eu
E.N.Z. Engineering GmbH Salzmatten 6 79341 Kenzingen (Germany)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>