ricoo Z0101 Flexible Cable Duct Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo Z0101 Flexible Cable Duct
WHAT IN BOX
Caution
NOTE : READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION
AND ASSEMBLY
Please note: Images in these assembly instructions are only technical
presentation of the product. Actual product design may vary minimally. Do not
begin the installation until you have read and understood all the instructions
and warnings contained in this installation sheet. If you have any questions
regarding any of the instructions or warnings, please contact your local
distributor. This product was designed to be installed and used ONLY as
specified in this manual. Improper installation of this product may cause
damage or serious injury. This product may only be assembled / installed by
the technical staff. Make sure that the supporting surface will safely support
the combined weight of the equipment and all attached hardware and components.
Always use an assistant or mechanical lifting equipment to safely lift and
position the equipment. Make sure that before and after the installation of
the product neither you nor somebody else can be injured and other objects can
be damaged. In case of doubt request for help from an expert. This product is
intended for indoor use only. Using this product outdoors could lead to
product failure and personal injury. Tighten screws firmly, but do not over
tighten. Over tightening can cause damage the items, this greatly reduces
their holding power
INSTALLATION
E-Mail: support@ricoo.de
www.ricoo.eu
E.N.Z. Engineering GmbH\ Salzmatten 6 79341 Kenzingen (Germany)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>