ricoo FS0444 TV Stand Base Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo FS0444 TV Stand Base
Product Information
- Product Name: TV Screen Mount
- Model Number: FS0444 FS0464
- Maximum Load Weight: 50kg (110lbs)
- Maximum VESA Hole Distance: A min. : 200 mm max. : 400 mm (FS0444), A min. : 200 mm max. : 600 mm (FS0464)
- Manufacturer: E.N.Z. Engineering GmbH – Manufacturer Address: Salzmatten 6, 79341 Kenzingen (Germany) – Manufacturer
- Contact: E-Mail: support@ricoo.de, Website: www.ricoo.eu
Product Usage Instructions
1. Before installation, check the distance between the VESA mounting holes on
your display. 2. Ensure that the load weight does not exceed the maximum load
weight of 50kg (110 lbs). Exceeding this weight limit can cause property
damage or serious injury. 3. Determine the VESA hole distance on your screen
back. The VESA hole distance refers to the distance between the mounting holes
on the screen back. 4. Choose the appropriate mounting bracket (FS0444 or
FS0464) based on your VESA hole distance. 5. Attach the mounting brackets to
the back of your TV screen using the provided screws and washers. 6. Position
the TV screen mount on the desired wall or surface. 7. Use a level to ensure
that the TV screen mount is straight and aligned. 8. Mark
the drilling points on the wall or surface for mounting. 9. Drill holes at the
marked points and insert the provided wall anchors, if necessary. 10. Securely
attach the TV screen mount to the wall or surface using the appropriate screws
and washers. 11. Double-check
that the TV screen mount is securely attached and level. 12. Carefully lift
and place the TV screen onto the mounted brackets, ensuring that it is
securely attached. 13. Adjust the angle and position of the TV screen as
desired. 14. Once the TV screen is properly positioned, tighten any adjustable
screws or knobs to secure its position. 15. Verify that the TV screen is
stable and properly mounted before use. 16. To remove the TV screen, reverse
the installation steps.
Note: – It is important to follow the provided load weight and VESA hole
distance specifications to ensure safe and proper installation.
If you have any questions or need further assistance, contact the
manufacturer’s support team via email at
support@ricoo.de or visit their website at
www.ricoo.eu.
Warning: Do not exceed listed load weight. Property damage oder serious injury may occur!
Please check BEFORE installation distance between VESA mounting holes on your
display!
This screen mount supports VESA hole distance in the minimum and maximum
distance ranges given above.
VESA – Hole distance = Distances between the mounting holes on the screen
back.
Scope of delivery
The numbering on the plastic bag may differ/missing completely!
NOTE: READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND ASSEMBLY
-
Please note: Images in these assembly instructions are only technical presentation of the product. Actual product design may vary minimally.
-
Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet.
-
If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
-
This product was designed to be installed and used ONLY as specified in this manual.
-
Improper installation of this product may cause damage or serious injury.
-
This product may only be assembled/installed by the technical staff. Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components. Always use an assistant or mechanical lifting equipment to safely lift and position the equipment. Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert.
-
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage the items, this
greatly reduces their holding power. -
reason of large television construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types.
ASSEMBLY INSTRUCTION
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>