ricoo S0944 Curved TV Wall Mount LCD LED Monitors Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo S0944 Curved TV Wall Mount LCD LED Monitors
Product Information
- Product Name: Screen Mount
- Model Number: S0944
- Manufacturer: E.N.Z. Engineering GmbH – Manufacturer
- Address: Salzmatten 6, 79341 Kenzingen (Germany) – Contact
- Information: E-Mail : support@ricoo.de, Website: www.ricoo.eu
Product Usage Instructions
-
Before starting the installation, read the entire instruction manual carefully.
-
Ensure that you do not exceed the listed load weight of 40kg (88lbs) to avoid property damage or serious injury.
-
Check the VESA mounting hole distances on your display before installation. – Minimum VESA hole distance for A: 200mm, and maximum distance: 420mm. – Minimum VESA hole distance for B: 120mm, and maximum distance: 400mm. – The supported
VESA hole distances include: 200×200, 300×200, 400×200, 200×300, 300×300, 400×300, 200×400, 300×400, and 400×400. -
Use a professional bubble level for accurate installation. – Recommended the use of a professional bubble level in ES (Spanish) and IT (Italian) languages.
-
The package includes the following components:
-
A x1, C x2, D x1, B x2, E x2, F x4, M-A x4, M-B x4, M-C x4, M5x14, M-D x4, M6x14, M-E x4, M8x20, M-F x4, M6x30, M-G x4, M-H x8, M-I x8, W-A x6, 6.3×55, W-B x6, W-C x6, D6.
-
The provided installation accessories are suitable for mass concrete walls only.
-
If the screws M-C, M-D, M-E, M-F are too long, use the plastic spacers M-H, M-I as shown in Step 5 B. Please note that the above information is based on the provided text-extract from the user manual. For complete and accurate instructions, refer to the
original user manual provided with the product.
Warning: Do not exceed listed load weight. Property damage oder serious injury may occur!
Dear customer,
we are pleased that you have decided for a product of the brand “RICOO”.
Sometimes, despite our efforts to provide you with a high-quality product, it
may happen that an accessory is missing or a part is damaged during transport.
Please do not return the item in such a case, simply request replacement for
the missing or damaged part at our customer hotline. Contact details from our
customer hotline are listed below. When contacting us, please mention the
article data (listed on top), article color as well as the required spare part
numbers (including the required quantity of items), as indicated in the “Scope
of delivery” section of this manual. Please keep ready your order number /
order ID for our customer hotline. We will process your request immediately!
Scope of delivery
We recommend using a professional level.
Please check BEFORE installation distance between VESA mounting holes
on your display!
This screen mount supports VESA hole distance in the minimum and maximum distance ranges given above.
VESA – Hole distance = Distances between the mounting holes on the screen back.
NOTE: Read the entire instruction manual before you start installation and assembly
- Please note: Images in these assembly instructions are only technical presentations of the product. Actual product design may vary minimally.
- Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
- This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
- This product may only be assembled/installed by the technical staff.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- When mounting on the wooden beams wall, make sure that the fastening screws are anchored in the center of the beams. It is highly recommended to use a beam finder.
- Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
- Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage the items, this greatly reduces their holding power.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- By reason of large television construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types.
- Each wall is built up of different materials which can result a special requirement. Therefore we are concentrating on the delivery of installation materials only for mass concrete walls. Use our included installation accessories only for mass concrete walls.
- If your walls have a special demand of materials, we advise you to ask in an expert shop for a suitable acquirement of the installation materials.
- Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert.
- Make also sure that you and optionally the co-helper or representatives have registered the mounting instructions before the installation and also the warning notice.
INSTALLATION
E.N.Z. Engineering GmbH, Salzmatten 6, 79341 Kenzingen (Germany)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>