ricoo TS5611, TS5711, TS5811 Tischloch Montage Set Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo TS5611, TS5711, TS5811 Tischloch Montage Set
Product Information
- Product Name: RICOO TS5611/TS5711/TS5811
- Manufacturer: E.N.Z. Engineering GmbH
- Scope of Delivery: – A x1 – B x1
- Contact Information:
- Email: support@ricoo.de – Website: www.ricoo.eu
- Manufacturer’s Address: Salzmatten 6, 79341 Kenzingen, Germany Product Usage
Instructions
- Start by unpacking the product and ensure that you have received all the components mentioned in the scope of delivery.
- Identify component A and component B.
- Follow the numbered steps provided in the user manual to assemble the product.
- For step 3, position component A as shown in the diagram (numbered as 1).
- For step 4, adjust the height of component A within the range of 10mm to 88mm using the provided mechanism.
- For step 5, position component B as shown in the diagram (numbered as 2).
- For step 6, ensure that all the components are securely attached and properly aligned.
- Once assembly is complete, refer to the user manual for any additional instructions or information regarding usage or maintenance.
- The assembly is considered finished when all steps are completed successfully.
- If you have any questions or need further assistance, please contact RICOO support via email or visit their website for more information.
Note: The provided instructions are based on the assumption that the user is following the English version of the user manual.
WHAT IS IN THE BOX
The numbering on the plastic bag may differ/missing completely!
INSTALLATION
E.N.Z. Engineering GmbH, Salzmatten 6, 79341 Kenzingen (Germany)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>