ricoo S0722 Swivel Arm TV Monitor Holder Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo S0722 Swivel Arm TV Monitor Holder
Product Information
The product is a screen mount that supports VESA hole distance in the minimum and maximum distance ranges. It has a maximum load weight capacity of 35kg (77lbs). The package includes various screws, plastic spacers, and wall anchors suitable for solid concrete walls.
Product Usage Instructions
- Before installation, check the distance between the VESA mounting holes on your display.
- Ensure that you do not exceed the listed load weight to avoid property damage or serious injury.
- If the screws (M-C, M-D, M-E) are too long, use the plastic spacers (M-G, M-H) as shown in Step 5A.
- Mount the screen mount on a solid concrete wall using the supplied plastic anchors.
- Follow the provided diagram and use the specified screws and spacers to assemble the screen mount.
- Use a professional bubble level to ensure proper alignment during installation.
- Once assembled, attach your display to the screen mount using the VESA mounting holes.
- Ensure that all components are securely tightened.
- After installation, check for stability and make any necessary adjustments.
- Once satisfied, your installation is complete.
Please note: If you encounter any issues or have further questions, contact E.N.Z. Engineering GmbH for support via email at [email protected] or visit their website at www.ricoo.eu. Their address is Salzmatten 6, 79341 Kenzingen, Germany.
Warning: Do not exceed listed load weight. Property damage oder serious injury may occur!
Please check BEFORE installation distance between VESA mounting holes on your
display!
This screen mount supports VESA hole distance in the minimum and maximum
distance ranges given above.
VESA – Hole distance = Distances between the mounting holes on the screen back
Box Include
- We recommend using a professional level.
- The numbering on the plastic bag may differ / missing completely!
Important Notes
-
NOTE: READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND ASSEMBLY
-
Please note: Images in these assembly instructions are only technical presentation of the product. Actual product design may vary minimally.
-
Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the
instructions or warnings, please contact your local distributor. This product was designed to be installed and used ONLY as specified in this manual. -
Improper installation of this product may cause damage or serious injury. This product may only be assembled / installed by the technical staff.
-
Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
-
Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
-
Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert. This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. Tighten screws firmly, but do not over tighten. Over tightening can cause damage the items, this greatly reduces their holding power.
-
By reason of large television construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types.
-
Each wall is built up of different materials which can result a special requirement. Therefore we are concentrated on the delivery of installation materials only for mass concrete walls. Use our included installation accessories only for mass concrete walls.
-
When mounting on the wooden beams wall, make sure that the fastening screws are anchored in the center of the beams. It is highly recommended to use a beamfinder. If your walls have a special demand of materials, we advise you to ask in an expert shop for a suitable acquirement of the installation materials.
Installation£
Warning: Supplied plastic anchors are only suitable for solid concrete walls!
- N Use the matching screws and spacers for your display.
- If the screws “M-C, M-D, M-E” are too long, use the plastic spacers “M-G, M-H”. (like in Step 5 A)
Done!
Contact Us
- E-Mail: [email protected] S0722
- www.ricoo.eu