ricoo Z1122 Cable Tray Universal Cable Management Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo Z1122 Cable Tray Universal Cable Management
Product Information
The product is manufactured by E.N.Z. Engineering GmbH, a company based in
Kenzingen, Germany. It is designed for assembly and comes with a set of
instructions in multiple languages, including German (DE), English (EN),
French (FR), Spanish (ES), and Italian (IT). The current version of the
instructions is v.21.11.
The product is identified as Z1122 and is delivered by E.N.Z. Engineering GmbH
at their address: Salzmatten 6, 79341 Kenzingen, Germany. For any support or
inquiries, customers can contact the company via email at support@ricoo.de or
visit their website at www.ricoo.eu.
The scope of delivery includes the following items:
- A x1
- B x2
- C x2
Product Usage Instructions
- Start by unpacking the delivered items to ensure you have all\ the necessary components.
- Refer to the assembly instructions provided in your preferred language: DE, EN, FR, ES, or IT.
- Identify and locate the components labeled A, B, and C.
- Begin the assembly process by following the step-by-step instructions provided in the manual.
- Use the quantity specified for each component (e.g., A x1, B x2) as a reference during assembly.
- Ensure that all components are securely attached and properly aligned according to the instructions.
- Once assembly is complete, verify that all steps have been followed correctly.
- Congratulations! Your product is now ready for use.
NOTE: READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND
ASSEMBLY
Please note: Images in these assembly instructions are only technical
presentations of the product. Actual product design may vary minimally. Do not
begin the installation until you have read and understood all the instructions
and warnings contained in this installation sheet. If you have any questions
regarding any of the instructions or warnings, please contact your local
distributor. This product was designed to be installed and used ONLY as
specified in this manual. Improper installation of this product may cause
damage or serious injury. This product may only be assembled / installed by
the technical staff. Make sure that the supporting surface will safely support
the combined weight of the equipment and all attached hardware and components.
Always use an assistant or mechanical lifting equipment to safely lift and
position the equipment. Make sure that before and after the installation of
the product neither you nor somebody else can be injured and other objects can
be damaged. In case of doubt request for help from an expert. This product is
intended for indoor use only. Using this product outdoors could lead to
product failure and personal injury. Tighten screws firmly, but do not over
tighten. Over tightening can cause damage the items, this greatly reduces
their holding power.
WHAT IN BOX
PRECAUTION
INSTALLATION
E-Mail : support@ricoo.de
www.ricoo.eu
E.N.Z. Engineering GmbH Salzmatten 6 79341 Kenzingen (Germany)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>