ricoo TS2611 Monitor Screen Table Mount Universal Pivotable Tiltable Rotatable Instruction Manual

: June 12, 2024
: ricoo

Table of Contents

Warning Instructions
Scope of delivery
Dimension
Assembly Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ricoo TS2611 Monitor Screen Table Mount Universal Pivotable Tiltable Rotatable Instruction Manual

Warning: Do not exceed listed load weight. Property damage oder serious injury may occur

Warning Instructions

Scope of delivery

The numbering on the plastic bag may differ / missing completely!

Dimension

A 75 mm 100 mm
B 75 mm 100 mm
75×75 100×100

Please check BEFORE installation distance between VESA mounting holes on your display!

This screen mount supports VESA hole distance in the minimum and maximum distance ranges given above.

VESA – Hole distance = Distances between the mounting holes on the screen back.

NOTE: READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND ASSEMBLY

Please note: Images in these assembly instructions are only technical presentation of the product. Actual product design may vary minimally. Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor. This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury. This product may only be assembled / installed by the technical staff. Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components. Always use an assistant or mechanical lifting equipment to safely lift and position the equipment. Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert. This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. Tighten screws firmly, but do not over tighten. Over tightening can cause damage the items, this greatly reduces their holding power.

By reason of large television construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types.

When mounting on the wooden beams wall, make sure that the fastening screws are anchored in the center of the beams. It is highly recommended to use a beamfinder. If your walls have a special demand of materials, we advise you to ask in an expert shop for a suitable acquirement of the installation material