ricoo F0522 Flat Wall Mount For Monitor TV Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
Assembly Instructions
F0522
Warning: Do not exceed listed load weight. Property damage oder serious injury may occur!
Scope of delivery
The numbering on the plastic bag may differ / missing completely!
We recommend using a professional level.
NOTE: Read the entire instruction manual before you start installation
and assembly
Please note: Images in these assembly instructions are only technical
presentation of the product. Actual product design may vary minimally.
Do not begin the installation until you have read and understood all the
instructions and warnings contained in this installation sheet. If you have
any questions regarding any of the instructions or warnings, please contact
your local distributor. This product was designed to be installed and used
ONLY as specified in this manual. Improper installation of this product may
cause damage or serious injury. This product may only be assembled / installed
by the technical staff. Make sure that the supporting surface will safely
support the combined weight of the equipment and all attached hardware and
components. Always use an assistant or mechanical lifting equipment to safely
lift and position the equipment. Tighten screws firmly, but do not over
tighten. Over tightening can cause damage the items, this greatly reduces
their holding power. This product is intended for indoor use only. Using this
product outdoors could lead to product failure and personal injury.
By reason of large television/monitor construction types on the market, we
can’t adjust our screen installation materials for each screen type. Therefore
it is possible that the screws which are numerously delivered don’t fit with
your TV/Monitor. We ask for your understanding that we can’t cover up all
possibilities of many screen types.
Make sure that before and after the installation of the product neither you
nor somebody else can be injured and other objects can be damaged. In case of
doubt request for help from an expert.
Please check BEFORE installation distance between VESA mounting holes on your
display!
This screen mount supports VESA hole distance in the minimum and maximum
distance ranges given above.
VESA – Hole distance = Distances between the mounting holes on the screen
back.
- Use the matching screws and spacers for your display.
- If the screws “F, G, H, I” are too long, use the plastic spacers “D”.
E-Mail: support@ricoo.de
www.ricoo.eu
E.N.Z. Engineering GmbH
Salzmatten 6
79341 Kenzingen
(Germany)