ricoo BH-08 Speaker Mount Stand Stand Set Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo BH-08 Speaker Mount Stand Stand Set
DIMENSION
WHAT INBOX
The numbering on the plastic bag may differ/missing completely! 
NOTE: READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND
ASSEMBLY
Please note: Images in these assembly instructions are only technical
presentations of the product. Actual product design may vary minimally. Do not
begin the installation until you have read and understood all the instructions
and warnings contained in this installation sheet. If you have any questions
regarding any of the instructions or warnings, please contact your local
distributor. This product was designed to be installed and used ONLY as
specified in this manual. Improper installation of this product may cause
damage or serious injury. This product may only be assembled/installed by the
technical staff. Make sure that the supporting surface will safely support the
combined weight of the equipment and all attached hardware and components.
Always use an assistant or mechanical lifting equipment to safely lift and
position the equipment. Make sure that before and after the installation of
the product neither you nor somebody else can be injured and other objects can
be damaged. In case of doubt request help from an expert. This product is
intended for indoor use only. Using this product outdoors could lead to
product failure and personal injury. Tighten screws firmly, but do not over-
tighten. Over-tightening can cause damage the items, this greatly reduces
their holding power.
INSTALLATION
Warning: Do not exceed the listed load weight. Property damage or serious
injury may occur!
E.N.Z. Engineering GmbH, Salzmatten 6, 79341 Kenzingen (Germany)
CONTACT
- E-Mail: support@ricoo.de.
- www.ricoo.eu.
- E.N.Z. Engineering GmbH
- Salzmatten 6
- 79341 Kenzingen
- (Germany)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>