ricoo FS0610 Professional TV Stand Instruction Manual

June 12, 2024
ricoo

Assembly Instructions

DVD                   CAM                   TV

MAX               MAX                MAX

5kg               5kg              1000kg

11lbs                11lbs                   220lbs

Warning: Do not exceed listed load weight. Property damage order serious injury may occur!


Please check BEFORE installation distance between VESA mounting holes on your display!

This screen mount supports VESA hole distance in the minimum and maximum distance ranges given above.

VESA – Hole distance = Distances between the mounting holes on the screen back.

FS0610

E-Mail: support @ ricoo.de

www.ricoo.eu

E.N.Z. Engineering GmbH
Salzmatten 6
79341 Kenzingen
(Germany)

Scope of delivery

The numbering on the plastic bag may differ / missing completely!

NOTE: READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND ASSEMBLY

Please note: Images in these assembly instructions are only technical presentation of the product. Actual product design may vary minimally.
Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor. This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury. This product may only be assembled / installed by
the technical staff. Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components. Always use an assistant or mechanical lifting equipment to safely lift and position the equipment. Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert. This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. Tighten screws firmly, but do not over tighten. Over tightening can cause damage the items, this greatly reduces their holding power.


By reason of large television construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your
TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types

Curved A


Use the matching screws and spacers for your display.

Flat B


Use the matching screws and spacers for your display.


If the screws “M-C, M-D, M-E” are too long, use the plastic spacers “M-G, M-H”. (like
in Step 8 A)

Done!

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals