RICOO S1844 Speaker Mount Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
RICOO S1844 Speaker Mount
Product Information
The product is a screen mount that supports VESA hole distance in the minimum and maximum distance ranges. It has a maximum load weight capacity of 40kg (88 lbs). The package includes various components such as screws, plastic anchors, and spacers.
Product Usage Instructions
- Before installation, check the distance between the VESA mounting holes on your display.
- Ensure that the load weight does not exceed the listed maximum weight capacity to avoid property damage or serious injury.
- Choose the appropriate VESA hole distance for your display.
- Mount the screen mount on a solid concrete wall or wooden beam using the supplied plastic anchors or appropriate screws.
- If the screws provided are too long, use the plastic spacers (MH or MI) as directed in Step 5 B.
- Attach the screen to the mount using the specified screws (MA, MB, MC, MD, ME, MF, MG).
- Optional: Use additional components (WA, WB, WC) for wall fixation or reinforcement.
- Ensure proper alignment and use a professional bubble level for accurate positioning.
- Double-check all connections and tighten any loose screws if necessary.
- Once installation is complete, verify that the screen is securely mounted.
- Enjoy using your screen mount!
Please note that these instructions are a summary. For detailed instructions, refer to the product manual or contact customer support.
If you have any further questions or need assistance, please feel free to contact us at support@ricoo.de or visit our website at www.ricoo.eu. ENZ Engineering GmbH, Salzmatten 6, 79341 Kenzingen (Germany).
Warning:
Do not exceed listed load weight. Property damage oder serious injury may
occur!
Scope of delivery
We recommend using a professional level.
Dimension
Please check BEFORE installation distance between VESA mounting holes on
your display!
This screen mount supports VESA hole distance in the minimum and maximum
distance ranges given above.
- VESA – Hole distance = Distances between the mounting holes on the screen back.
BEFORE YOU START INSTALLATION AND ASSEMBLY
NOTE:
READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION AND ASSEMBLY
Please note:
Images in these assembly instructions are only technical presentations of the
product. Actual product design may vary minimally.
Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor. This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury. This product may only be assembled/installed by the technical staff. Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components. Always use an assistant or mechanical lifting equipment to safely lift and position the equipment. Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert. This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage the items, this greatly reduces their holding power.
- By reason of large television construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types.
- Each wall is built up of different materials which can result in a special requirement. Therefore we are concentrating on the delivery of installation materials only for mass concrete walls. Use our included installation accessories only for mass concrete walls.
When mounting on the wooden beams wall, make sure that the fastening screws are anchored in the center of the beams. It is highly recommended to use a beam finder. If your walls have a special demand of materials, we advise you to ask in an expert shop for a suitable acquirement of the installation materials.
Assembly Instructions
For mounting on the solid concrete wall
Warning:
Supplied plastic anchors are only suitable for solid concrete walls!
For mounting on the wooden beam wall
For displays with a flat back
- If the screws “M-D, M-E, M-F” are too long, use the plastic spacers “M-H” and “M-I”. (like in Step 5 B)
- Use the matching screws and spacers for your display.
For displays with curved back
Use the matching screws and spacers for your display.
(optional)
This Wall Bracket has a rotation function of the front panel. Therefore the
screen is turnable horizontally / vertically. This has the advantage that you
can align horizontally the screen at any time. To permit this function, the
adjusting screws on the front panel are set in the factory so that you can
adjust the screen straightly with your hands without loosening the screws
which is possible without extra tools. With this feature, you can align the
screen with your hands in horizontally or in another desired position when
swinging out or folding the bracket.
If the factory setting of the rotation function is too strong or free-moving: Thus you can regulate/control this by loosening or tightening the shown screws.
E.N.Z. Engineering GmbH, Salzmatten 6, 79341 Kenzingen (Germany).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>