RICOO S3144 TV Wall Bracket Extendable Foldable Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
RICOO S3144 TV Wall Bracket Extendable Foldable
Product Information:
The product is a screen mount that supports VESA hole distance in the minimum and maximum distance ranges. It has a maximum load weight of 50kg (110lbs). The package includes various screws, plastic anchors, and plastic spacers. It is recommended to use a professional bubble level for installation.
Product Usage Instructions
- Before installation, check the distance between the VESA mounting holes on your display.
- Ensure that the load weight does not exceed 50kg (110lbs) to avoid property damage or serious injury.
- If mounting on a solid concrete wall, use the supplied plastic anchors.
- Use the provided screws and plastic spacers as necessary to ensure proper installation.
- Follow the step-by-step instructions provided in the manual to assemble and mount the screen.
- If the screws provided are too long, use the plastic spacers (M-H, M-I) to adjust the length.
- Use a professional bubble level to ensure the screen is mounted straight.
- Once the installation is complete, refer to the manual for further instructions on cable management or any additional features.
- Ensure that the screen mount is securely attached and stable before use.
- For any further assistance or support, contact E.N.Z. Engineering GmbH via email or visit their website.
Note: The instructions are available in multiple languages (German, English, French, Spanish, Italian).
Assembly Instructions
Warning: Do not exceed listed load weight. Property damage oder serious injury may occur!
Please check BEFORE installation distance between VESA mounting holes on your
display!
This screen mount supports VESA hole distance in the minimum and maximum
distance ranges given above.
VESA – Hole distance = Distances between the mounting holes on the screen
back.
UNPACKING
Scope of delivery
We recommend using a professional level.
The numbering on the plastic bag may differ/missing completely!
NOTE: READ THE ENTIRE INSTRUCTION MANUAL BEFORE YOU START INSTALLATION
AND ASSEMBLY
Please note: Images in these assembly instructions are only technical
presentation of the product. Actual product design may vary minimally.
Do not begin the installation until you have read and understood all the
instructions and warnings contained in this installation sheet. If you have
any questions regarding any of the instructions or warnings, please contact
your local distributor. This product was designed to be installed and used
ONLY as specified in this manual. Improper installation of this product may
cause damage or serious injury. This product may only be assembled/installed
by the technical staff. Make sure that the supporting surface will safely
support the combined weight of the equipment and all attached hardware and
components. Always use an assistant or mechanical lifting equipment to safely
lift and position the equipment.
Make sure that before and after the installation of the product neither you
nor somebody else can be injured and other objects can be damaged. In case of
doubt request for help from an expert. This product is intended for indoor use
only. Using this product outdoors could lead to product failure and personal
injury. Tighten screws firmly, but do not over tighten. Over-tightening can
cause damage the items, this greatly reduces their holding power.
By reason of large television construction types on the market, we can’t
adjust our screen installation materials for each screen type. Therefore it is
possible that the screws which are numerously delivered don’t fit with your
TV/Monitor. We ask for your understanding that we can’t cover up all
possibilities of many screen types.
Each wall is built up of different materials which can result a special
requirement. Therefore we are concentrated on the delivery of installation
materials only for mass concrete walls. Use our included installation
accessories only for mass concrete walls.
When mounting on the wooden beams wall, make sure that the fastening screws
are anchored in the center of the beams. It is highly recommended to use a
beamfinder. If your walls have a special demand of materials, we advise you to
ask in an expert shop for a suitable acquirement of the installation
materials.
Warning: Supplied plastic anchors are only suitable for solid concrete walls!
INSTALLATION
Use the matching screws and spacers for your display.
Use the matching screws and spacers for your display.
This Wall Bracket has a rotation function of the front panel. Therefore the
screen is turnable horizontally / vertically. This has the advantage that you
can align horizontally the screen at any time. To permit this function, the
adjusting screws on the front panel are set in the factory so that you can
adjust the screen straightly with your hands without loosen the screws which
is possible without extra tools. With this feature you can align the screen
with your hands in a horizontal or in another desired position when swinging
out or folding of the bracket.
If the factory setting of the rotation function is too strong or free-moving:
Thus you can regulate/control this by loosening or tightening the shown
screws.
E-Mail: support@ricoo.de
www.ricoo.eu
E.N.Z. Engineering GmbH, Salzmatten 6, 79341 Kenzingen (Germany)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>