ricoo TRH-06 Calculator PC Mount Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo TRH-06 Calculator PC Mount
Product Information
- Product Name: Unknown
- Version: v.21.10
- Maximum Load Weight: 10kg / 22lbs
- Languages: DE, EN, FR, ES, IT
- Manufacturer: E.N.Z. Engineering GmbH
- Manufacturer Address: Salzmatten 6, 79341 Kenzingen (Germany)
Contact Information:
- E-Mail: support@ricoo.de.
- Website: www.ricoo.eu.
Product Usage Instructions
- Step 1: Before starting the installation and assembly, read the entire instruction manual.
- Step 2: Ensure that the load weight does not exceed 10kg / 22 lbs. Exceeding the load weight may result in property damage or serious injury.
- Step 3: Check the scope of delivery to ensure you have all the necessary components.
- Step 4: Follow the provided montageanleitung (assembly instructions) in your preferred language (DE, EN, FR, ES, IT).
- Step 5: Use the specified quantities and sizes of screws (B x4 ST4.8×16, C x4 ST4.8×38, D x4) for the assembly.
- Step 6: Use the provided components (A x1, E x12, F x4, G x1, TRH-06) as instructed in the manual.
- Step 7: Pay attention to the numbered steps (I, II, III) and corresponding diagrams for proper assembly.
- Step 8: Use a 4mm drill for certain steps (4a, 4b) and a 3mm drill for other steps (3).
- Step 9: Follow the specified order of assembly (B, C, D) for proper installation.
- Step 10: Once the assembly is complete, the product is ready to use.
- Step 11: The manufacturer, E.N.Z. Engineering GmbH, confirms completion with the following phrases: DE Fertig! EN Done! FR Fait! ES Hecho! IT Fatto!
- Step 12: For any support or assistance, contact the manufacturer via email (support@ricoo.de) or visit their website (www.ricoo.eu).
Warning:
Do not exceed listed load weight. Property damage oder serious injury may
occur!
The numbering on the plastic bag may differ/missing completely!
Dear customer,
we are pleased that you have decided for a product of the brand “RICOO”.
Sometimes, despite our efforts to provide you with a high-quality product, it may happen that an accessory is missing or a part is damaged during transport. Please do not return the item in such a case, simply request replacement for the missing or damaged part at our customer hotline. Contact details from our customer hotline are listed below. When contacting us, please mention the article data (listed on top), article color as well as the required spare part numbers (including the required quantity of items), as indicated in the “Scope of delivery” section of this manual.
Please keep ready your order number/order ID for our customer hotline. We will process your request immediately!
Scope of delivery
Before you start the installation
NOTE:
Read the entire instruction manual before you start installation and assembly
- Please note: Images in these assembly instructions are only technical presentations of the product. Actual product design may vary minimally.
- Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
- This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
- This product may only be assembled/installed by the technical staff.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
- Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage the items, this greatly reduces their holding power.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt, request help from an expert.
- Make also sure that you and optionally the co-helper or representatives have registered the mounting instructions before the installation and also the warning notice.
Installation
Warning:
Supplied plastic anchors are only suitable for solid concrete walls!
E.N.Z. Engineering GmbH, Salzmatten 6, 79341 Kenzingen (Germany).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>