V-TAC VT-7312 20W LED Designer Table Lamp Installation Guide
- June 12, 2024
- V TAC
Table of Contents
**V-TAC VT-7312 20W LED Designer Table Lamp Installation Guide
**
TECHNICAL DATA
| MODEL | VT-7312 |
|---|---|
| WATTS | 17W |
| LUMENS | 1700lm |
| BEAM ANGLE | 360° |
| BODY TYPE | Silicone + Aluminum |
| DIMENSION | 210x350mm |
| INPUT POWER | AC:100-240V, 50/60Hz |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- Please turn power off before cleaning the fixture
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard
- For indoor use only
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
Non-replaceable control gear
Non-replaceable light source
IMPORTANT SAFEGUARDS
- Before the first connection of the lamp ensure that voltage indicated on the rating label corresponds with the mains voltage.
- The lamp is checked on full conformity to the quality standards and safety.
- The manufacturer is not responsible for damage of properties and persons, caused by incorrect use of the unit.
INSTALLATION INSTRUCTION
Step 1: Connect the plug into the socket (make sure the power is OFF
before connecting the
plug into the socket)
Step 2: Turn ON the power and test the light.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
Documents / Resources
|
V-TAC VT-7312 20W LED Designer Table
Lamp
[pdf] Installation Guide
VT-7312, VT-7312 20W LED Designer Table Lamp, 20W LED Designer Table Lamp, LED
Designer Table Lamp, Designer Table Lamp, Table Lamp, Lamp
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>