CRYSTORAMA HAY-1402-AG Two Light Wall Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA HAY-1402-AG Two Light Wall Mount
ASSEMBLY INSTRUCTION
MODEL #HAY-1402-AG
WARNING
- All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
- You will need 2-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max
- USE LED BULBS FOR EXTENDED USE This fixture is Dry rated
How to Install
- Do a complete inventory of all parts and components before you start installing.
- After safely attaching the fixture to the outlet box, install bulbs (not included) and proceed to connect the power.
- When you begin to dress the fixture, start with the crystal labeled (A).
- IMPORTANT: Apply crystal sets in alphabetical order.
DETAILED ILLUSTRATION
Crystal Sets
- A. 5Sets. (1)22x360mm
- B. 7Sets. (1)22x280mm
- C. 9Sets. (1)22x200mm
WARNING: This product can expose you to Lead. which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
Part Number
- A. (2)-Wire Connector
- B. (1)-Mounting Plate
- C. (2)-Outlet Box Screws
- D. (1)-Ground Wire
- E. (1)-Backplate; w4.375″ x 7″ x h0.75″ ( XFB1402AGBKP4.375IN)
- F. (1)-Frame
- G. (2)-Ball Nut (XFB1402AGBANUT)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>