CRYSTORAMA HAY-1403-PN Eight Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA HAY-1403-PN Eight Light Ceiling Mount
Product Information
- Model: HAY-1403-PN
- Part Number: HAY-1403-PN
- Assembly Instruction: Included
- Fixture Rating: Dry Rated
- Recommended Bulb Type: Candelabra Base Bulb
- Recommended Bulb Wattage: 40 Watts
- Maximum Bulb Wattage: 60 Watts
- Extended Use: Use LED Bulbs Electrical Safety: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
- California Proposition 65 Warning: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Assembly Instructions
- Attach the mounting plate to the outlet box using two outlet screws.
- Hang the frame onto the mounting plate by hooking the cable wire into the slots as shown.
- Install bulbs (not included) and proceed to connect the power.
- Insert the pin into the crystal and then insert the crystal onto the band ring.
- After all the crystals are installed, raise the fixture up to the ceiling and secure it with the finial.
Product Detailed Illustration
Part Numbers
- A. (2)-Wire Connector
- B. (1)-Mounting Plate
- C. (2)-Outlet Box Screws
- D. (2)-Ground Wire
- E. (2)-Cable Wire
- F. (1)-Frame
- G. (1)-Washer
- H. (1)-Nut
- I. (1)-Check Ring
- J. (1)-Finial (XFB1400PNFIN)
Part Bags
- Part Bag 1: Includes Parts A, C
- Part Bag 2: Includes Parts B, G, H, I, J
ASSEMBLY INSTRUCTION
- MODEL #HAY-1403-PN
WARNING
- All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
- You will need 8-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max
- USE LED BULBS FOR EXTENDED USE The fixture is dry rated
How to Install
- Attach the mounting plate to the outlet box using two outlet screws.
- Hang the frame onto the mounting plate by hooking the cable wire into the slots as shown.
- Install bulbs (not included) and proceed to connect the power.
- Insert the pin into the crystal and then insert the crystal onto the band ring.
- After all the crystals are installed, raise the fixture up to the ceiling and secure it with the finial.
DETAILED ILLUSTRATION
Crystal Sets
- A. 12Sets. (1)30x200mm
- B. 24Sets. (1)30x150mm
- C. 36Sets. (1)30x100mm
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
Part Number
Part Numbers
- A. (2)-Wire Connector
- B. (1)-Mounting Plate
- C. (2)-Outlet Box Screws
- D. (2)-Ground Wire
- E. (2)-Cable Wire
- F. (1)-Frame
- G. (1)-Washer
- H. (1)-Nut
- I. (1)-Check Ring
- J. (1)-Finial (XFB1400PNFIN)
PART BAGⅠ: Includes Parts A, C
PART BAG Ⅱ: Includes Parts B, G, H, I, J
References
Read User Manual Online (PDF format)
Loading......