CRYSTORAMA HAY-1417-PN 16 Light Chandelier Instruction Manual

CRYSTORAMA HAY-1417-PN 16 Light Chandelier

Product Information:

The model number of the product is HAY-1417-PN. This fixture is designed to provide lighting and has been in the market for sixty years. It is dry rated and can be used indoors.

The product requires 16-Candelabra Base Bulbs, with a recommended wattage of 40 Watts and a maximum wattage of 60 Watts. It is recommended to use LED bulbs for extended use.

The package includes various parts such as wire connectors, mounting plate, plastic anchors & screws, outlet box screws, ground wire, cable wire, canopy, screws, chain, fixture loop, metal tube, threaded pipe, check ring, and frame.

Caution: This product contains lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Product Usage Instructions:

1. Slide one check ring over the coupler on top of the frame. Screw the threaded pipe into the coupler and slide the metal tube
   over the threaded pipe. Slide another check ring over the top of the metal tube and secure it with the fixture loop.

2. Place the mounting plate over the outlet box and mark 6 points on the ceiling at the center of the 6 holes on the mounting plate.

3. Drill holes at the marked points and insert the plastic anchors.

4. Attach the mounting plate over the outlet box using two outlet box screws. Insert the anchor screws into the plastic anchors to tighten it.

5. Decide the preferred hanging height and choose the correct length of chain needed.

6. Connect one end of the chain to the fixture loop using a quick link and the other end to the loop underneath the canopy using the other quick link.

7. Raise the fixture up to the ceiling and do the wire connection. Secure the canopy to the mounting plate with screws.

8. Insert the crystal rods as illustrated. Pay attention to the glass rod direction when inserting it into the frame.

Note: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

WARNING

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate

You will need 16-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max USE LED BULBS FOR EXTENDED USE This fixture is Dry rated

How to Install

1. Slide one check ring over the coupler on top of frame. Screw the threaded pipe into the coupler and slide the metal tube over the threaded pipe. Slide another check ring over the top of metal tube and secure with fixture loop.
2. Place the mounting plate over the outlet box and mark 6 points on the ceiling at the center of the 6 holes on the mounting plate.
3. Drill the holes at the marked points and insert the plastic anchors.
4. Attach the mounting plate over the outlet box using two outlet box screws. Insert the anchor screws into the plastic anchors to tighten it.
5. Decide the preferred hanging height and choose the correct length of chain needed.
6. Connect one end of chain to the fixture loop using a quick link and the other end to the loop underneath the canopy using the other quick link.
7. Raise the fixture up to the ceiling and do the wire connection. Secure the canopy to the mounting plate by the screws.
8. Insert the crystal rods as illustrated. Please pay attention to the glass rod direction when inserting it into the frame.

Crystal Sets

A. 82Sets.(1)30x300mm
B. 62Sets.(1)30x200mm

DETAILED ILLUSTRATION

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

PART NUMBER

MODEL #HAY-1417-PN

• A. (2)-Wire Connector
• B. (1)-Mounting Plate
• C. (6)-Plastic anchors & screws
• D . (6)-Outlet Box Screws
• E. (1)-Ground Wire
• F. (1)-Cable Wire
• G. (1)-Canopy; w27.5″ x 5″ x h0.8″ (XFB1417PNCAN27IN)
• H. (6)-Screws
• I. (2)-Chain; 72″, 4mm (XFB1417PNCHA4MM)
• J. (2)-Fixture Loop
• K. (2)-Metal Tube; 8.5″, 16MM thickness (XFB1405PNROD8.5IN)
• L. (2)-Threaded Pipe; 9.5″, 12MM thickness (XFB1405PNSTEM9.5IN)
• M. (4)-Check Ring
• N. (1)-Frame

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>