CRYSTORAMA HAY-1417-AG Hayes 16 Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #HAY-1417-AG
HAY-1417-AG Hayes 16 Light Chandelier
DETAILED ILLUSTRATION
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.You will need 16-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max USE LED BULBS FOR EXTENDED USE This fixture is Dry rated
How to Install
- Slide one check ring over the coupler on top of frame. Screw the threaded pipe into the coupler and slide the metal tube over the threaded pipe. Slide another check ring over the top of metal tube and secure with fixture loop.
- Place the mounting plate over the outlet box and mark 6 points on the ceiling at the center of the 6 holes on the mounting plate.
- Drill the holes at the marked points and insert the plastic anchors.
- Attach the mounting plate over the outlet box using two outlet box screws. Insert the anchor screws into the plastic anchors to tighten it.
- Decide the preferred hanging height and choose the correct length of chain needed.
- Connect one end of chain to the fixture loop using a quick link and the other end to the loop underneath the canopy using the other quick link.
- Raise the fixture up to the ceiling and do the wire connection. Secure the canopy to the moutning plate by the screws.
- Insert the crystal rods as illustrated. Please pay attention to the glass rod direction when inserting it into the frame.
Crystal Sets
A. 82Sets.(1)30x300mm
B. 62Sets.(1)30x200mm
WARNING: This product can expose you to Lead, which is known to the State
of California to cause cancer and/or birth defects or reproductive harm. For
more information go to www.P65Warnings.ca.gov
Short end above frame
Part Number
Part Numbers
A. (2)-Wire Connector
B. (1)-Mounting Plate
C. (6)-Plastic anchors & screws
D. (6)-Outlet Box Screws
E. (1)-Ground Wire
F. (1)-Cable Wire
G. (1)-Canopy; w27.5″ x 5″ x h0.8″ (XFB1417AGCAN27IN)
H. (6)-Screws
I. (2)-Chain; 72″, 4mm (XFB1417AGCHA4MM)
J. (2)-Fixture Loop
K. (2)-Metal Tube; 8.5″, 16MM thickness (XFB1405AGROD8.5IN)
L. (2)-Threaded Pipe; 9.5″, 12MM thickness (XFB1405AGSTEM9.5IN)
M. (4)-Check Ring
N. (1)-Frame
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>