CRYSTORAMA HAY-1400-AG Four Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA HAY-1400-AG Four Light Ceiling Mount
Safety Warning
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes.
You will need 4-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max
USE LED BULBS FOR EXTENDED USE
The fixture is dry rated
How to Install
- Attach the mounting plate onto the outlet box using two outlet screws.
- Hang the frame onto the mounting plate by hooking the cable wire into the slots as shown.
- Install bulbs (not included) and proceed to connecting the power.
- Insert the pin into crystal and then Insert the crystal onto the band ring.
- After all the crystal are installed, raise the fixture up to the ceiling and secure with the finial.
Crystal Sets
DETAILED ILLUSTRATION
- A. 21Sets. (1)30x250mm
- B. 32Sets. (1)30x200mm
Dimensions
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Wamings.ca.gov
Part Number
- A. (2)-Wire Connector
- B. (1)-Mounting Plate
- C. (2)-Outlet Box Screws
- D. (1)-Ground Wire
- E. (2)-Cable Wire
- F. (1)-Frame
- G. (1)-Washer
- H. (1)-Nut
- I. (1)-Check Ring
- J. (1)-Finial (XFB1400AGFIN)
PART BAGⅠ: Includes Parts A, C
PART BAG Ⅱ: Includes Parts B, G, H, I, J
Customer Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>