Golden Lighting 3189-WSC Penn 1 Light Matte Black Wall Sconce Instruction Manual
- June 12, 2024
- GOLDEN LIGHTING
Table of Contents
Golden Lighting 3189-WSC Penn 1 Light Matte Black Wall Sconce
Product Information
The product is a lighting fixture manufactured by Golden Lighting. It is available in the model number 3189-WSC BLK-MWS.
The fixture comes pre-assembled and does not require any additional assembly. It is designed to provide both task and ambient lighting, making it suitable for various spaces in your home.
The fixture has different wires labeled as Hot, Neutral, and Ground. The ground wire is made of copper, bare metal, green, or transparent inner thread.
For any inquiries or replacement parts, please contact the place of purchase or visit Golden Lighting’s website at www.GoldenLighting.com.
Product Usage Instructions
Pendants & Linear Pendants Above a Kitchen Island
To install a linear pendant or multiple hanging pendants above a kitchen island:
- Center a linear pendant over the island.
- If using hanging pendants, use one pendant for every 24 inches of the island. Fixtures should hang at least 30 inches above the countertop.
Pendants & Chandeliers Above a Dining Room Table
To install pendants or chandeliers above a dining room table:
- Fixtures should hang at least 30 inches above the table.
- Use a fixture that is 12 inches narrower than the width of the table.
Pendants and Chandeliers in Open Areas
To install pendants or chandeliers in open areas:
- The bottom of the fixture should hang at least 7.5 feet from the floor.
- Ensure clearance for any opening doors.
Tips for Best Lighting in Your Space:
- Layer your lighting by using coordinating fixtures like sconces, flush mounts, and pendants.
- Install dimmers to control the level of light output.
For more information, expert lighting advice, and coordinating lights, visit Golden Lighting’s website at www.GoldenLighting.com.
Thank You for Choosing Golden Lighting for Your Lighting Needs!
DIMENSIONS
-
Pendants & Linear Pendants Above a Kitchen Island
-
Center a linear pendant over the island. If hanging pendants, use one pendant for every 24″ of the island. Fixtures should hang at least 30″ above the countertop.
-
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″ narrower than the width of the table.
-
Pendants and Chandeliers in Open Areas
The bottom should hang at least 7.5 feet from the floor. Allow clearance for any opening doors.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the best lighting in your space, remember to layer your lighting. This ensures that your space will have both task and ambient lighting. Coordinating fixtures like sconces, flush mounts, and pendants can help you meet your layered lighting needs and reinforce your desired aesthetic. Install the lights with dimmers that allow you to control the level of light output at any given moment.
Get function and style! Browse our site for coordinating lights and expert
lighting advice. To help create the perfect look, visit
www.GoldenLighting.com.
Love your light and want to show it off? Follow us, share a picture, and tag us on Social…
Assembly Instructions
MODEL NO: 3189-WSC
How to Identify the Fixture’s Wires
- Hot: Smooth, Black, or Transparent with Black Inner Thread
- Neutral: Ribbed, White or Transparent with White Inner Thread
- Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
INSTALLATION
For Customer Service, contact the place of purchase to arrange for replacement parts.
IMPORTANT:
- All installation work should be done by an accredited professional.
- Shut off the power supply at the fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag that holds all of the parts. See the important notes above. Shut off power at the circuit breaker and remove old fixture from wall, including the old mounting strap. 1. Place mounting bracket (A) up against your junction box. Position the mounting bracket so that the holes on the side are level and parallel with the floor. 2. Secure mounting bracket (A) to the wall’s junction box using mounting screws (B) and a screwdriver. Tighten the screws securely. 3. Pull the house wires through the center of the mounting bracket (A).
ASSEMBLING THE FIXTURE
No Assembly Required – This item arrives assembled and ready for installation.
Please proceed to the next step.
CONNECTING THE WIRES
4. Have an assistant support the fixture’s weight while completing the wiring. Refer to the wiring diagram and attach the fixture’s wires to the power supply wires from the junction box. Attach the fixture’s wires to the power supply wires from the junction box. Connect Hot to Hot (transparent wire with black inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with white inner thread, white, or ribbed wire), and Ground to Ground (transparent wire with green inner thread, green wire, or copper). Twist the ends of the wire pairs together, and then twist on a wire connector. Make sure all twists are in the same direction. If there is no house ground wire coming from the junction box, locate ground screw (E) on the mounting bracket/mounting strap and wrap the fixture’s ground wire around the ground screw. Use a screwdriver to tighten the top of ground screw (E) onto the wires and into the mounting bracket/mounting strap. Tuck the wires into the junction box.
FINISHING THE INSTALLATION
TO INSTALL USING FABRIC SHADE REFER TO DIAGRAM (1):
5. Place backplate (D) over the mounting bracket (A). Ensure the holes in the backplate and on the side of the mounting bracket align. Insert small screws (C) into the holes on the side of the backplate (D) to secure it to mounting bracket (A). 6. Hold shade (H) up to socket (F) and secure it in place using socket ring (G). 7. Install a light bulb (not included) in accordance with the fixture’s specifications. Do not exceed the maximum recommended wattage. Your installation is now complete. Turn on the power and test the fixture.
TO INSTALL USING GLASS SHADE REFER TO DIAGRAM (2):
5. Place the backplate (D) over the mounting bracket (A). Ensure the holes in the backplate and on the side of the mounting bracket align. Insert small screws (C) into the holes on the side of the backplate (D) to secure it to mounting bracket (A). 6. Hold shade (H) upto socket (F) and secure it in place using a cap (I) and socket ring (G). 7. Install a light bulb (not included) in accordance with the fixture’s specifications. Do not exceed the maximum recommended wattage. Your installation is now complete. Turn on the power and test the fixture.
Get help, quick tips, and explore curated content
SCAN ME