TECLAST TLN001 Mini PC User Manual

User Manual

TECLAST Mini PC

Connection and quick start guide

1. Insert the DC power plug from the adapter into the power interface on the host.
2. Connect the AC adapter plug to the AC/DC adapter.
3. Plug the AC adapter into the power socket.
4. Prepare the display screen by yourself and connect it to the host using an HDMI cable or DP cable.
5. Prepare the keyboard and mouse by yourself and connect them to the host.
6. Press the power button on the host to boot up the system. Then follow the prompts to complete user activation and set up the system.

11, Instructions for configuration upgrade/replacement (please complete the following operations when the power supply is disconnected)

1. 0pen the cover
   1. With the bottom of the host upwards, unscrew and remove the screws with a screwdriver of the corresponding specification. Remove the screws and place them properly in a visible place to avoid loss. Gently lift the bottom cover.
   

2. Install the SSD (Some models do not support this)
   1. Align the notch on the golden finger of the solid-state disk with the M.2 slot on the motherboard and insert it in the correct direction;
   2. After confirming that the golden finger is installed in place, press down on the solid-state disk and tighten the screw for fixing;

3. Install DDR memory (Some models do not support this)
   1. Align the notch on the golden finger of the memory bank with the slot of memory on the motherboard and insert it in the oblique direction;
   2. After confirming that the golden finger is installed in place, slowly press down the memory bank to the bottom. You will hear the click. Ensure that the memory is installed in place;

4. Close the cover
   1. Align the notch of the bottom cover. And then tighten the four screws with a screwdriver of the corresponding specification.

Notes

• Please purchase and use memory and hard disk from reputable brands.
• Avoid proximity to water sources or damp areas, such as bathrooms, kitchens, basements, and swimming pools.
• Ensure that the equipment is installed and placed in a stable position. Dropping it may result in personal injury or equipment damage.
• Store and use the equipment in a cool, dry, and well-ventilated place. Keep a safe distance from radiation and heat sources.
• Do not cover or block the ventilation holes on the device’s shell. Avoid using it on surfaces like beds, sofas, blankets, or similar objects.
• The required supply voltage range for equipment operation is indicated on the label on the rear shell. If you are unsure about the supplied voltage, consult your dealer or local power company.
• When the equipment is not in use for an extended period, disconnect the power supply to prevent damage from electrical shocks and power voltage abnormalities during thunderstorms.
• Use a properly grounded socket and avoid overloading it to prevent the risk of fire or electric shock.
• Do not insert foreign objects into the machine, as it may cause a short circuit, fire, or electric shock.
• Avoid attempting to disassemble or repair this product yourself to minimize the risk of electric shock. In case of a failure, please contact the after-sales service personnel directly.
• Do not excessively pull or twist the power cord.
• If the power cord of the adapter is damaged, it must be replaced with a specialized component purchased from the manufacturer or maintenance department.
• This product complies with EMC standards when peripheral devices that comply with the standards are used, along with shielded cables between system components.
• Use peripheral devices that comply with the standards and employ shielded cables between system components to reduce the possibility of interference with radios, televisions, and other electronic devices.
• This product contains button cells. Avoid swallowing them, as it may pose a risk of suffocation or chemical burns.
• Do not dispose of used cells in household waste. Follow the relevant national regulations for safe disposal of used cells.
• Working environment: Temperature between 0°C and 35°C, humidity between 30% and 85%.
• Storage environment: Temperature between -20°C and 60°C, humidity between 10% and 90%.

FCC Warning

This device complies with part 15 of the FGC rules. Operation s subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

©2023 Guangzhou shangke Information Co. Ltd, All rights reserved

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>