TECLAST TLA001 Tablet User Guide

TECLAST TLA001 Tablet

This setup guide will help you get started, select system language, time zone, connect to Wi-Fi, set up your username, and device name.

Button Functions

• power button .
  • When the device is off, long press power button for 3 secs to turn on the device.
  • When the device is on, short press power button to turn on/off screen.
  • When the device is on, long press power button for 3 secs to access the shutdown interface, long press for 10 secs to force shut down the device. ‘
• Volume+ button: Press to increase the volume. ‘
• Volume button: Press to decrease the volume.

http://mvw.teclast.com

Virtual Button Bar

Control Center

Wi-Fi Connection

1. Open Settings and go to Network & nternet setting.
2. .Turn on Wi-Fi, choose a wireless network, and enter the network password to connect.

Cellular Connection

1.  insert SIM card and power on the system.
2. open Settings and go to Network & Internet setting.
3. Turn on cellular data toggle.
   applicable to supported devices only.

Bluetooth Connection

1. Open Settings and go to Connected Device setting.
2. Turn on Bluetooth and system will automatically search for Bluetooth devices nearby.
3. Click on the connectable Bluetooth device then select Pair In the pop-up menu.
4. Walt for the Bluetooth device to confirm pairing.
   *Applicable to supported devices only.

Display

Open Settings and go to Display setting.

1. Brightness: Slide the barto adjust screen brightness.
2. Wallpaper: Set the wallpapen
3. .Sleep: Set screen time-out.
4. Font size: Set the Size of system fonts.
5. Auto rotation: Lock current screen orientation or automatically rotate the screen based on device orientation.

Sound

Open Settings and go to the Sound setting.

1. volume: Slide the bar to adjust the volume of media, alarm, and ringtone.
2. .Notification: Set notification sound.
3. Ringtone: Set incoming call ringtone.
4. 0ther Sounds: Set lock screen and touch sound effects

HDMI

Turn on TV and set the input source to HDMI, connect the device to TV using an HDMI cable.

1. Mode: adjust screen resolution and refresh rate.
2. Zoom & Scale: Zoom in/out and adjust the display aspect ratio.
3. Screen Adjustment Compensation: Fine-tune display aspect ratio.

Battery Status

Open Settings and go to Battery setting to view battery usage. Battery ndicator: Toggle the switch to display battery percentage.

Connect to PC

Device can be connected to a PC using a USB cable to copy or delete data on the device.

1. Operating systems including Windows 7 and above will automatically install MTP drivers when the device is connected to a PC.
2. For Windows XP, Windows Media Player 11 must be installed before the device can be connected.

Application Management

Open Settings and go to Application setting to uninstall apps, clean cache & data, and force close apps.

1. Third party applications: can be uninstalled.
2. .System applications: cannot be uninstalled.

Users

Open Settings and go to User setting.

1. System supports multi-user login.
2. Each user can set their personal applications and content.

Location

Open Settings and go to Location setting.

1. Toggle Use Location switch to turn on/off location services.
2. .View recent location requests and configure location permission on a per-app basis.

Security

Open Settings and go to Security setting.

1. Screen lock modes: choose between swipe, pattern, pin, and password modes.
2. unknown source: allow/deny app installation from unknown sources

Language and Input

Open Settings and go to Language and Input setting.

1. Language: select system language.
2. Input: select the default system input method and its respective settings

Accounts Management

Open Settings and go to Accounts setting.

1. Add accounts for installed applications.
2. .Manage data syncing for existing accounts.

Factory Reset

1. Open Settings and go to System Setting, Advanced, Reset Options to perform a factory reset.
2. Factory reset will erase all personal data, please backup your data before resetting.

Date and Time

Open Settings and go to Date and Time setting.

1. Automatic date & time: turn on to automatically sync to local time when connected to the internet. You can manually adjust the date and time by turning off this function.
2. Automatic time zone: turn on to automatically sync to local time zone when connected to the internet. You can manually adjust the time zone by turning off this function.
3. 24-hour format: choose benmeen AM/PM and 24-hour display formats.

USB OTG function

This device supports USB OTG function to exchange data with other portable devices (flash drive, mobile hard disk, mouse, and keyboard). I.Devices need to be connected to this device via an OTG cable. 2.Please keep battery above 50% while using OTG function. A separate power supply is needed for high-power consumption devices.
Android is a trademark Of Google LLC.

FCC Radiation Exposure Statement

This device meets the government’s requirements far exposure to radio waves. The guidelines are based an standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health, The SAR limit of LJSA (FCC) is 1.6 W/kg averaged. Device types: Tablet PC (FCC D: 2ACGT- TLA001) has also been tested against this SAR limit. SAR information on this and ather pad can be viewed on line at http://www.fcc.gav/oet/ea/fccid/. Please use the device FCC D number for search. This device was tested simulation typical Omm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user’s bodies mentioned above, use accessories should not contain metallic components in its assembly, the use af accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference, and
• (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1 : This equipment has been tested and found ta comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if nat installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment aff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• increase the separation heüeen the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

MIC Warning
5.2 GHz band is restricted to indoor use only (Exceptwhen communicating with 5.2GHz high power base stations or relay stations), 5.3 GHz band is restricted to indoor use due to the Radio Law Android is a trademark of Google LLC.

Charger Specifications

• Charger specs should match the input voltage/current shown on the back of the product,
• PIease only use chargers that meets the above specification.
• PIease do a full recharge every 3 months if the product is going to stay unused for an extended period. OFor first use after storage, the product may require a 30 minute charging session before charging status is indicated.

This table is proposed in accordance with the provision of Tl 1364. X: Indicate that said hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572. O: Indicate that said hazardous substance in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572. This series of products implement the national standard: GB 28380-2012 (Microcomputer Energy Efficiency Limit and Energy Efficiency Grade) Guangzhou Shangke information Technology Limited Teclast official website: http://wvuw.teclast.com
Technical support: aftersales@skl999.com Made In China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>