CRYSTORAMA HAY-1402-PN Hayes 2-Light Polished Nickel Wall Mount Instruction Manual

LIGHTING THE WAY FOR SIXTY YEARS
MODEL #HAY-1402-PN

ASSEMBLY INSTRUCTION

DETAILED ILLUSTRATION

Short end above frame
WARNING:

Electrical Danger
Turn Power Off) All electrical components must be installed by a licensed electrician In accordance with the National Electric Code and the appropriate local electrical codes. You will need 2-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max USE LED BULBS FOR EXTENDED USE This fixture is Dry rated

How to Install

1. Do a complete inventory of all parts and components before you start installing.
2. After safety attaching fixture into outlet box.install bulbs (not included) and proceed to connecting the power.
3. When you begin to dress the fixture,start with crystal labeled (A).
4. IMPORTANT: Apply crystal sets in alphabetical order.

Crystal Sets
A. 5Sets. (1)22x360mm
B. 7Sets. (1)22x280mm
C. 9Sets. (1)22x200mm
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Part Number

Part Numbers
A. (2)-Wire Connector
B. (1)-Mounting Plate
C. (2)-Outlet Box Screws
D. (1)-Ground Wire
E. (1)-Backplate; w4.375″ x 7″ x h0.75″ (XF81402PNBP4.375IN)
F. (1)-Frame
G. (2)-Ball Nut (XFB1402PNBANUT)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>