GOLDEN LIGHTING 6076-FM BLK-NR Marlee Flush Mount Instructions

GOLDEN LIGHTING 6076-FM BLK-NR Marlee Flush Mount

Product Information

The product is a lighting fixture manufactured by Golden Lighting. It is available in the model number 6076-FM BLK-NR. The fixture comes pre-assembled and is ready for installation. The package includes a ceiling pan, finial, and sockets for light bulbs (not provided). The fixture is designed to provide both task and ambient lighting, and it can be used in various areas of the home, such as kitchen islands, dining room tables, and open spaces. The fixture should be installed at least 30 inches above countertops and dining tables, and the bottom should hang at least 7.5 feet from the floor in open areas.

Product Usage Instructions

Pendants & Linear Pendants Above a Kitchen Island:

1. Center a linear pendant over the kitchen island.
2. If using hanging pendants, use one pendant for every 24 inches of the island.
3. The fixtures should hang at least 30 inches above the countertop.

Pendants & Chandeliers Above a Dining Room Table:

1. The fixtures should stay at least 30 inches above the table.
2.  Choose a fixture that is 12 inches narrower than the width of the table.

Pendants and Chandeliers in Open Areas:

1. The bottom of the fixture should hang at least 7.5 feet from the floor.
2. Make sure to allow clearance for any opening doors.

Installation:

1. Contact the place of purchase for any replacement parts or customer service inquiries.
2. Prepare for installation by reviewing the assembly instructions.
3. Assemble the fixture if required. Note that the 6076-FM model arrives pre-assembled.
4. Connect the fixture’s wires to the house wires, ensuring the correct matching of hot, neutral, and ground wires.
5. Finish the installation by pushing the ceiling pan up to the ceiling and threading the finial onto the exposed threads of the nipple to secure the ceiling pan in place.
6. Install light bulbs (not provided) into the sockets according to the fixture’s specifications. Do not exceed the maximum wattage.
7. Turn on the power and test the fixture to ensure it is functioning properly.
   For additional help, quick tips, and curated content, visit www.GoldenLighting.com.

DIMENSION

• Pendants & Linear Pendants Above a Kitchen Island
  Center a linear pendant over the island. If hanging pendants, use one pendant for every 24″ of island. Fixtures should hang at least 30″ above the countertop.

• Pendants & Chandeliers Above a Dining Room Table
  Fixtures should stay at least 30″ above the table. Use a fixture that is 12″ narrower than the width of the table.

• Pendants and Chandeliers in Open Areas
  The bottom should hang at least 7.5 feet from the floor.

We appreciate your business and hope you love your new light!

• Great lighting can add value and enhance the look of your home. To ensure the best lighting in your space, remember to layer your lighting. This ensures that your space will have both task and ambient lighting. Coordinating fixtures like sconces, flush mounts, and pendants can help you meet your layered lighting needs and reinforce your desired aesthetic. Install the lights with dimmers that allow you to control the level of light output at any given moment.
• Get function and style! Browse our site for coordinating lights and expert lighting advice. To help create the perfect look, visit www.GoldenLighting.com.

Assembly Instructions

For Customer Service, contact the place of purchase to arrange for replacement parts.

IMPORTANT:

• All installation work should be done by accredited professional.
• Shut off power supply at fuse or circuit breaker!
• Use only the specified bulbs. Do not exceed the maximum wattage!

Assembly Instructions

• PREPARING FOR INSTALLATION
  Carefully remove the new fixture from the carton as well as the yellow bag that holds all of the parts. See the important notes above. Shut off power at the circuit breaker and remove old fixture from wall, including the old mounting strap. 1. From the parts bag remove the mounting strap assembly. One end of nipple (F) should be attached to mounting strap (A) with washer (C) and hex nut (D) in place. Attach mounting strap (A) to the junction box using mounting screws (B) and a screwdriver. Tighten securely.

• ASSEMBLING THE FIXTURE
  No Assembly Required – This item arrives assembled and ready for installation. Please proceed to the next step.

• CONNECTING THE WIRES
  Have an assistant support the fixture’s weight while completing the wiring. Refer to the wiring diagram and attach the fixture’s wires to the power supply wires from the junction box. Attach the fixture’s wires to the power supply wires from the junction box. Connect Hot to Hot (transparent wire with black inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with white inner thread, white, or ribbed wire), and Ground to Ground (transparent wire with green inner thread, green wire, or copper). Twist the ends of the wire pairs together, and then twist on a wire connector. Make sure all twists are in the same direction. If there is no house ground wire coming from the junction box, locate ground screw (E) on the mounting bracket/mounting strap and wrap the fixture’s ground wire around the ground screw. Use a screwdriver to tighten the top of ground screw (E) onto the wires and into the mounting bracket/mounting strap. Tuck the wires into the junction box.

• FINISHING THE INSTALLATION
  Push ceiling pan (G) up to the ceiling and thread finial (H) onto the exposed threads of nipple (F) to secure the ceiling pan in place. Install light bulbs (not provided) into sockets (M) in accordance with the fixture’s specifications. Do not exceed the maximum wattage. Your installation is now complete. Turn on the power and test the fixture.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>