BRAINLIT Balder Lighting for Health and Wellbeing Instruction Manual
- June 12, 2024
- BRAINLIT
Table of Contents
BRAINLIT Balder Lighting for Health and Wellbeing
Product Information
The product is a luminaire with a Balder design. It consists of a driver, WAGO connectors, screws, a diffusor, and a light source(s). The luminaire is powered by a power connection.
Product Usage Instructions
Disassembly instructions
-
STEP 1: To disassemble the luminaire, unplug the power connection by pulling apart the WAGO connectors.
-
STEP 2: Take down the luminaire by opening the ceiling cup and unscrewing the screws that secure the cup to the ceiling.
-
STEP 3: Unscrew the screw(s) on the driver touch protection using a screwdriver with a PH2 head. Press down the cable securing button on the driver to unplug the cables.
-
STEP 4: Unscrew all the screws on the top of the luminaire using a suitable bit and screwdriver.
-
STEP 5: Remove the diffusor from the luminaire. Note: Do not use any sharp objects.
-
STEP 6: Unplug the light source(s) by pressing in the center and pulling them out.
-
STEP 7: Unscrew the screws holding the light source(s) using a suitable bit and screwdriver.
-
STEP 8: Recycle all parts accordingly.
If you are replacing the light source, attach the new light source and remount the luminaire by following these instructions in reverse order.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>