IKEA INSJON Kitchen Mixer Tap Chrome Plated Installation Guide
- June 6, 2024
- Ikea
Table of Contents
IKEA INSJON Kitchen Mixer Tap Chrome Plated
Installation must be performed in compliance with current local construction and plumbing regulations. If in doubt, contact a professional.
Switch off main shut-off valve before changing mixer tap.
Seal the open surfaces with silicone to prevent water from penetrating the worktop upon any leaks. Silicone is not included.
IMPORTANT! Do not tighten too hard: this candamage hoses/pipes and washers.
Before use: Unscrew the Aerator/Flow Guide with a coin and allow the water to run freely for a few minutes. Then screw the Aerator/Flow Guide back in place up to the stop DO NOT OVER TIGHTEN.
Check at regular intervals to make sure that the installation is not leaking.
© Inter IKEA Systems B.V. 2017 2021-03-17 AA-2045613-6
Read User Manual Online (PDF format)
Loading......