SIIG JU-DK0P11-S1 Triple Hybrid 4K Video Docking Station with PD Charging User Manual
- June 5, 2024
- SIIG
Table of Contents
SIIG JU-DK0P11-S1 Triple Hybrid 4K Video Docking Station with PD
Charging
Features
- Support USB 10G speed connection between host and docking station. (USB 10G host required)
- Support USB 10G speed port x2, Type-A + Type-C
- Support USB SG speed port x3, Type-A x2 + Type-C
- Support three video output simultaneously, one DP ALT mode+ two
- Displaylink output support HDMI or DP
- Alt mode video output resolution up to 4K 3840x2160p@30Hz
- Alt mode video output support display’s EDID
- Displaylink video output resolution up to 4K 3840x2160p@60Hz
- Displaylink video output support PCM 2.0ch and 5.1ch audio
- Support Ethernet 10/100/1000Mbps
- Support 3.5mm Headset jack
- Support USB PD 3.0 charging 100W
- Support Kensington Security Slot
Package contents
- Triple Hybrid 4K Video Docking Station
- Power adapter DC 24V / 41A
- USB Type-C to Type-C cable 100W (20V/5A)
- USB Type -C to Type-A cable
(Type-A host not support DP Alt mode, USB 10G & PD charging)
- User Manual
System requirements
- Host computer system with an available USB Type-C (Thunderbolt 3 compatible) Port which supports DP Alt Mode and Power Delivery
- Windows ® 10 / 8 .1/ 8 / 7 (32/64 bit)
- Mac OS X® 10.14, 15 to 11.X, 12.X
Operating system requirements are subject to change. For the latest requirements, please visit www.siig.com and search JU- DK0P11-1
What is USB 3.1 Type-C?
- USB 3.1 Type-C is a new generation connector interface of USB 3.1 standard, that is capable to support for the following:
- USB 3.1 Gen 1 support up to 5 Gbps data transfer rate and USB 3.1 Gen 2 support up to 1OGbps data transfer rate
- Bi-directional power delivery up to 1OOW, if both the USB host connection and the device support it
- DP Alternate modes, the signal is based on the DisplayPort version to deliver different
Not all USB-C ports support the full functionality of the USB Type-C standard. For more information, please refer to the information provided by the manufacturers
DP alt mode (DisplayPort alternative mode)
This docking station supports DP alt mode, which means a DisplayPort video signal can be transferred over a USB-C cable.
Because the docking station supports DP alt mode, so the Alt mode video port can output the video directly via DP alt mode without other driver installs.
USB Power Delivery
This docking station supports USB Power Delivery, which means it delivers up to 100 watts of power to your connected host laptop (your laptop’s USB-C port must support power delivery). USB Power Delivery is a specification that allows power to be sent over a USB-C or Thunderbolt 3 cable that supports the specification.
Ensure your USB-C cable can support PD 100W transfer or use the included USB-C cable
Front View
-
USB 10G Type-A port:
Support USB UASP mode, 1OGbps speed and 5V/1.5A power output. connect for USB peripherals -
USB 1OG Type-C port:
Support USB UASP mode, 1OGbps speed and 5V/1.5A power output. connect for USB peripherals -
USB SG Type-C port:
Support USB UASP mode, 5Gbps speed and 5V/1.5A power output. connect for USB peripherals -
3.5mm headset jack:
connect to headset
(include audio and microphone
Side View
- USB-C host:
Connect to USB-C port which supports DP Alt Mode and Power Delivery.
PD charging 100W
(Please use include USB C to C cable) Not all USB-C ports support the full functionality of the USB Type-C standard. Ensure that your host USB-C port supports all functions
- Kensington Security Slot:
Connect a K-Slot Style Locking Device to the Lock Slot.
Note: Follow the manufacturer’s instructions when installing your Locking Device
Rear View
- Power jack:
Connect the Power Adapter to the DC Power Input Port on the Docking Station. DC 24V/5.41A
-
RJ-45 Gigabit Ethernet port connect to ethernet router or switch (Support 1000/100/10 Mbps)
-
USB SG ports:
USB 3.0 Type-A port support USB UASP mode, 5Gbps speed and 5V/900mA power output. connect for USB peripherals -
Displaylink video output 1
This video output via Displaylink chip Select DP or HDMI connect to display, they can’t output simultaneously -
Displaylink video output 2 This video output via Displaylink chip Select DP or HDMI connect to display, they can’t output simultaneously.
Resolution up to 3840x2160p@60Hz -
Alt Mode video output
This video output via host DP Alt mode Connec to HDMI display,
Resolution up to 3840x2160p@30Hz
Displaylink Manager installation
- “Displaylink Manager” software is required
- Without Displaylink Manager install, Displaylink video output 1 & 2 can not output
- Please download the “Displaylink Manager” from SIIG website or Displaylink website
- Follow the screen instructions to complete the installation and restart your PC/NB
(For Mac OS® 10.13.3 and the above, the system would display a “System Extension Blocked” warning while driver installing. Please allow “Displaylink Corp” at Security & Privacy setting.)
- For Displaylink configuration, please search & refer to Support document on Displaylink website https://support.displaylink.com/
Windows
How to configure Displaylink displays on Windows
MAC
How to configure Displaylink displays on Mac OS X
Displaylink Manager App for Introduction, Installation & Scope
Allow “Displaylink” app on Mac
Open Security Preference while driver installing
Allow “Displaylink Corp” app
Enable “Screen Recording”
macOS Catalina 10.15 requires the user to permit “Screen Recording” in order for Displaylink devices to work properly.
- Because the new permission will only be active the next time you start the ap plication, macOS will invite you to “Quit & Reopen”. In Catalina 15.x please select “Quit Now” . Please accept.
Supported Display resolution
| Only A | 4K@30 | N/A | N/A |
|---|---|---|---|
| Only B | N/A | 4K@60 | N/A |
| Only C | N/A | N/A | 4K@60 |
| A+B | 4K@30 | 4K@60 | NIA |
| A+C | 4K@30 | N/A | 4K@60 |
| B+C | N/A | 4K@60 | 4K@60 |
Q&A
- Why my laptop can’t get 100W charging? It depends on laptop charging spec, not all laptops need 100W
- Why Alt mode output has no video? Ensure your USB-C host port support DP Alt mode.
Every output has DP or HDMI output, but can only select one output at once.
- Why Displaylink output has no video? Ensure the Displaylink software have Every output has DP or HDMI output, but can only select one output at once.
• Why play video on Displaylink output will have latency or cause CPU
heavy loading?
Displaylink outputs are kind of USB video extend via Displaylink chip which
needs extra CPU computing. So Displaylink output will not fit to play video.
Recommend play video on Alt mode output
Support
For more info or tech support
Documents / Resources
| SIIG
JU-DK0P11-S1 Triple Hybrid 4K Video Docking Station with PD
Charging
[pdf] User Manual
JU-DK0P11-S1, Triple Hybrid 4K Video Docking Station with PD Charging, 4K
Video Docking Station, Docking Station, JU-DK0P11-S1, Station
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>