GOLDEN LIGHTING 3306-1W BCB-OP Orwell 1-Light Wall Sconce Instruction Manual

GOLDEN LIGHTING 3306-1W BCB-OP Orwell 1-Light Wall Sconce

Product Information

The product is a lighting fixture manufactured by Golden Lighting. It is available in model number 3306-1W BCB-OP. The fixture is designed for various lighting needs in different areas of a home, such as above a kitchen island, above a dining room table, and in open areas. The fixture can be used for both pendant and chandelier installations.

Product Usage Instructions

Above a Kitchen Island

• If using a linear pendant, center it over the island.
• If using hanging pendants, use one pendant for every 24 inches of the island.
• Hang the fixtures at least 30 inches above the countertop.

Above a Dining Room Table

• Hang the fixture at least 30 inches above the table.
• Choose a fixture that is 12 inches narrower than the width of the table.

In Open Areas:

• Ensure that the bottom of the fixture hangs at least 7.5 feet from the floor.
• Allow clearance for any opening doors.

Additional Tips

• To achieve the best lighting in your space, layer your lighting by using coordinating fixtures like sconces, flush mounts, and pendants.
• Consider installing dimmers to control the level of light output at any given moment.

For further assistance, replacement parts, or customer service, please contact the place of purchase. For more information and expert lighting advice, visit www.GoldenLighting.com.

Thank You for Choosing Golden Lighting for Your Lighting Needs!

Dimension

• Pendants & Linear Pendants Above a Kitchen Island
  • Center a linear pendant over the island. If hanging pendants, use one pendant for every 24″ of the island. Fixtures should hang at least 30″ above the countertop.
• Pendants & Chandeliers Above a Dining Room Table
  • Fixtures should stay at least 30″ above the table. Use a fixture that is 12″ narrower than the width of the table.
• Pendants and Chandeliers in Open Areas
  • The bottom should hang at least 7.5 feet from the floor.
  • Allow clearance for any opening doors.

We appreciate your business and hope you love your new light!

Great lighting can add value and enhance the look of your home. To ensure the best lighting in your space, remember to layer your lighting. This ensures that your space will have both task and ambient lighting. Coordinating fixtures like sconces, flush mounts, and pendants can help you meet your layered lighting needs and reinforce your desired aesthetic. Install the lights with dimmers that allow you to control the level of light output at any given moment.
Get function and style! Browse our site for coordinating lights and expert lighting advice. To help create the perfect look, visit www.GoldenLighting.com.

• Love your light and want to show it off?
• Follow us, share a picture, and tag us on Social…

Assembly Instructions

How to Identify the Fixture’s Wires

• Hot: Smooth, Black, or Transparent with Black Inner Thread
• Neutral: Ribbed, White or Transparent with White Inner Thread
• Ground: Copper, Bare Metal, Green, or Transparent Inner Thread

For Customer Service, contact the place of purchase to arrange for replacement parts

IMPORTANT:

• All installation work should be done by accredited professional.
• Shut off power supply at fuse or circuit breaker!
• Use only the specified bulbs. Do not exceed the maximum wattage!

PREPARING FOR INSTALLATION

Carefully remove the new fixture from the carton as well as the yellow bag that holds all of the parts. See the important notes above. Shut off power
at the circuit breaker and remove old fixture from wall, including the old mounting strap.

1. Mounting strap (B) contains several pairs of threaded holes. Find the pair of holes that matches the spacing of the holes on the junction box and your fixture’s backplate. Two sets of mounting screws (A & D) should be attached to the mounting strap (B). You may need to tighten nuts (C) that hold mounting screws (A) in place.

2. Pull the house wires through the center of the mounting strap (B). Place mounting strap (B) over the junction box so that mounting screws (A) are horizontal and in alignment with the hole locations on the backplate (F). Secure mounting strap (B) to the junction box with mounting screws (D) and a screwdriver. Tighten the screws securely.

   • ASSEMBLING THE FIXTURE
     No Assembly Required – This item arrives assembled and ready for installation. Please proceed to the next step.

   • CONNECTING THE WIRES

3. Have an assistant support the fixture’s weight while completing the wiring. Refer to the wiring diagram and attach the fixture’s wires to the power supply wires from the junction box. Attach the fixture’s wires to the power supply wires from the junction box. Connect Hot to Hot (transparent wire with black inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with white inner thread, white, or ribbed wire), and Ground to Ground (transparent wire with green inner thread, green wire, or copper). Twist the ends of the wire pairs together, and then twist on a wire connector. Make sure all twists are in the same direction. If there is no house ground wire coming from the junction box, locate ground screw (E) on the mounting bracket/mounting strap and wrap the fixture’s ground wire around the ground screw. Use a screwdriver to tighten the top of the ground screw (E) onto the wires and into the mounting bracket/mounting strap. Tuck the wires into the junction box.

   • FINISHING THE INSTALLATION

4. Place backplate (F) over mounting screws (A) so that they protrude through the holes in the front of the backplate (F). Thread deco nuts (G) onto the exposed threads of mounting screws (A). Twist until the backplate (F) of the fixture is snug against the wall.

5. Secure spider (I) to shade (L) with screws (K) and decorative cap (J). Carefully slide assembled shade (L) over a socket (H) and secure the shade in place with socket ring (M). Twist a light bulb into sockets (H) in accordance with the fixture’s specifications. Do not exceed the maximum wattage. Your installation is now complete. Turn on the power and test the fixture.

GoldenLighting.com
Get help, quick tips, and explore curated content

Documents / Resources

| GOLDEN LIGHTING 3306-1W BCB-OP Orwell 1-Light Wall Sconce [pdf] Instruction Manual
3306-1W BCB-OP, 3306-1W BCB-OP Orwell 1-Light Wall Sconce, Orwell 1-Light Wall Sconce, 1-Light Wall Sconce, Wall Sconce, Sconce
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>