BORMANN BVC5500 Dry and Wet Vacuum Cleaner Instruction Manual

Built to last.

BVC5500
038160
v2.1

BVC5500 Dry and Wet Vacuum Cleaner

Safety instructions

Before cleaning or maintaining the appliance, the power plug must be removed from the socket-outlet.
– Attention: Before assembly and starting operation, read the operating instructions carefully.
– Check that the mains voltage corresponds to the details on the type plate.
– Only connect to a proper 220-240 volt, 50Hz socket.
– Minimum fuse protection 13A.
– Pull the mains plug out of the socket when: the unit is not in use, before opening the unit, before cleaning and maintenance.
– Never clean with solvents.
– Do not use the cable to pull the plug out of the socket.
– When unit is ready for use, do not leave unattended.
– Safeguard from children.
– Care must be taken that the mains connection lead is not damaged by being driven over, crushed, stretched, etc.
– The unit must not be operated if the mains connection lead is not in perfect condition.
– If the supply cord is damaged, it must be replaced by the manufacturer or its service agent to a similarly qualified person in order to avoid a hazard.
– On no account vacuum: burning matches, glowing ashes and cigarette ends, inflammable, corrosive, fire hazard or explosive substances, vapours and liquids.
– This unit is not suitable for vaccuming dust which is damaging to health.
– Store the unit in a dry place.
– Do not operate a defection unit.
– Servicing only by an authorized after-sales service point.
– Use only for operations for which the unit is intended.
– Take great care when cleaning stairs.
– Use only manufacturer’s attachments and spare parts.
– This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
– Children should be supervised to ensure that they do not play with the appliance.
– IPX4 is only granted by connect an IPX4 plug to socket-out of the appliance or the cover of the socket-out is closed.

Technical data

• HEPA filter
• Wet & dry function
• Power tool socket

Description of main parts (Picture A)

1. Handle
2. ON/OFF switch
3. Top section
4. Filter basket
5. Safety float valve
6. Clasp
7. Container
8. Vacuum hose connection| 9. Idler wheel
10. Flexible vacuum hose
11. Vacuum tube
12. Air inlet
13. Large vacuum nozzle
14. Dust bag
15. Vaccuming liquids
16. Crevice nozzle
---|---

• The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
• Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
• To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

Assembly instructions

Wet vacuum – cleaning

– Unplug before change filter (Figure 1).
– Pull the supplied foamed plastic filter over the filter basket (Figure 2) for wet vacuum-cleaning.
– Insert the plug and turn on the switch, then appliance starts to work (Figure 4 & 5a or 5b)
– When push the switch to the “I” position, the vacuum cleaner will work alone; when push the switch to the “O” position, vacuum cleaner will not work; when push the switch to the “II” position, while the tool which is connected with the socket working, the vacuum cleaner also work 3-5 seconds later, while the tool stop working, the vacuum cleaner also stop working.
– The dust bag included upon delivery is not suitable for wet vacuum-cleaning!
Dry vacuum-cleaning

– Unplug before change filter (Figure 1), then take out the bag and empty the dust or replace the bag. Slip the dust bag onto the socket(figure 2) for dry vacuum-cleaning.
– Insert the plug and turn on the switch, then appliance starts to work (Figure 5 & 6a or 6b)
– When push the switch to the “I” position, the vacuum cleaner will work alone; when push the switch to the “O” position, vacuum cleaner will not work; when push the switch to the “II” position, while the tool which is connected with the socket working, the vacuum cleaner also work 3-5 seconds later, while the tool stop working, the vacuum cleaner also stop working.
– The dust bag is suitable only for dry vacuum-cleaning!

Maintenance – cleaning

Unplug before maintenance (Figure 1)
Take off the foamed plastic filter (Figure 3), and wash by water (Figure 5)
IMPORTANT: Do not use detergents to clean the filter. The filter must be thoroughly dry before the machine is used.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

      ****WWW.BORMANNTOOLS.COM

Documents / Resources

| BORMANN BVC5500 Dry and Wet Vacuum Cleaner [pdf] Instruction Manual
038160, BVC5500 Dry and Wet Vacuum Cleaner, BVC5500, Dry and Wet Vacuum Cleaner, Wet Vacuum Cleaner, Vacuum Cleaner
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>