TECTSIA STOFP001-3 Tabletop Fire Pit User Manual
- June 15, 2024
- TECTSIA
Table of Contents
TECTSIA STOFP001-3 Tabletop Fire Pit
How to Use Your Fire Pit
-
Step 1
Put the mat under the fire pit, stretch up the tripod, and remove the nested flame ring. -
Step 2
Light up your tinder, kindling, and small wood pieces in the center of the fire pit. For Best Results. Do Not Overfill With Wood That Covers Or Extends Above The Top Air Holes.
Step 3
Cover the tinder with a pellet adapter -
Step 4
Place the flame ring back on top of the fire pit with smaller angled edges pointing upward. This Will Provide Protection From The Wind And Enhances The Concentration Flames. -
Step 5
As it gets hotter, start adding wood/ pellet to catch fires, then add enough wood/ pellet around the edges of the pellet adapt to fill the burn chamber. -
Step 6
When you’re ready to leave, let the fire pit burn out on its own -
Step 7
After the fire pit has completely cooled, turn it over to empty the ash.
Product Specification
Material: 304 Stainless Steel
Fuel Type: Pellet, Wood
Product Dimensions:
5.51 x 5.51 x 7.48 Inches
Product Weight: 1.76Pounds
Included Components:
1x Mini Fire Pit
1x Flame Ring
1x Pellet Holder
1x Pellet Adapter
1x Pellet Scoop
1x Fire Pit Mat
1x Nylon Carry Bag
Storage and Care
- Caring for your fire pit correctly will prolong its outlook and usability.
- After each use, wait until the item has completely cooled down then turn the fire pit over to empty any remaining ash.
- If you want to wipe it down, use only a dry cloth.
- Always place your fire pit in its carrying case when not in use
- Prolonged exposure to moisture may result in increased rusting.
- Stainless steel has a huge resistance to rust; however, it is not rust-proof.
- Due to extremely high temperatures inside, the fire pit may show signs of discoloration, and staining.
- This is considered normal and will not affect normal use.
Tips
- Use dry wood /wood pellets for best results.
- Overfilling your fire pit above the top air holes will decrease efficiency and will produce more smoke.
- Do not add pellets too quickly, which can reduce airflow and cause the fire to be extinguished.
- When you first use your fire pit, the unique double-wall airflow within the unit will take approximately 5-15 minutes to achieve full efficiency. The more evenly your fire burns inside your fire pit the more prominent the flame pattern Showing the secondary combustion will appear.
User Warning
Do not use fire pits until you have read the operating instructions and user warnings.
- Fire pits are for outdoor use only and should not be used in a building garage or any other enclosed area.
- Fire pits are extremely hot when in use. Never attempt to touch or move your fire pit during use or before it has completely cooled down.
- Do not use fire pits for indoor heating. Toxic carbon. monoxide can accumulate and cause asphyxiation and possibly death.
- Fire pits are not for commercial use.
- Fire pits are not to be operated by children.
- Never leave fire pits unattended especially when children and pets are nearby.
- Do not lean objects against the fire pit.
- Always use the fire pit legs. Unfold the stand legs on the bottom of the fire pit. Place the stand on a level surface.
- Always use fire pits on a non-combustible surface only – it is not recommended to use fire pits on wood or composite surface decks.
- Fire pits are not to be used in a boat or recreational vehicle.
- When using a fire, exercise the same precautions you would with any open fire.
- The use of alcohol prescription non-prescription drugs may impair the consumer’s ability to operate fire pits safely.
- Do not alter or modify fire pits in any manner.
- Do not store or use gasoline or any other flammable vapors or liquids in the vicinity of fire pits.
- Do not store or use LP gas cylinders within 30 feet of fire pits while in operation.
- Do not use fire pits near automobiles trucks vans or recreational vehicles.
- Do not use fire pits in any explosive environment. Keep the area around fire pits clear and free of any combustible materials gasoline or any other flammable liquids.
- Do not use fire pits under an overhead or near any unprotected combustible constructions. Avoid using under or near any overhanging trees or shrubs.
- Do not wear flammable or loose clothing when operating fire pits.
- Do not use fire pits in windy conditions.
- Do not use gasoline kerosene, diesel fuel, lighter fluid alcohol, or any other flammable liquid to light or relight fire pits.
- Keep all electrical cords away from fire pits.
- All surfaces of fire pits are extremely hot when in operation. To avoid burns and serious injury do not touch your fire pit until the fire is completely out and it has completely cooled. Never touch the coals or ash to see if they’re still warm.
- Do not attempt to move or store your fire pit until all fire, coals, and ashes are completely extinguished, and the unit has completely cooled.
- Do not remove any ash or clean your fire pit until the coals and ash are completely extinguished and the unit has completely cooled.
- Do not lean over fire pits when lighting or when they are in use. Avoid breathing smoke from the fire and avoid getting smoke in your eyes.
- Fire pits should be inspected and cleaned regularly after each use.
- After a period of non-use check your fire pit for signs of damage and creosote buildup. Do not operate until necessary repairs and/or cleanup is done.
- Do not use water to extinguish the fire as this could cause damage to the fire pit as well as injury to the user.
- Serious injury, death, or property damage may occur if the above instructions are not followed exactly.
- Always use fire pits in accordance with all applicable local state and national codes/laws and fire regulations. Contact your local fire department for details.