ONE FOR ALL URC-4914 Panasonic TV Replacement Remote User Manual
- June 12, 2024
- ONE FOR ALL
Table of Contents
- ONE FOR ALL URC-4914 Panasonic TV Replacement Remote
- DISCRIPTION
- SET-UP
- LEARNING
- SOUND BAR / AUDIO RECEIVER VOLUME CONTROL
- AUDIO CODE SETUP
- APP SHORTCUT KEYS
- PRODUCT DISPOSAL (EUROPEAN DIRECTIVE 2012/19/EU)
- GUARANTEE TERMS AND CONDITIONS UNIVERSAL ELECTRONICS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ONE FOR ALL URC-4914 Panasonic TV Replacement Remote
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Use quality Alkaline batteries.
DISCRIPTION
-
POWER
Power -
TV
TV Input -
AV
Input Select -
TEXT
Teletext -
SUBTITLE
Subtitle -
ASPECT
Aspect Ratio, Format -
FAVORITE
Favorite Channel -
APP 1
Viera Link / App Shortcut Key -
GUIDE
Guide, TV Guide -
APP 3
Freeview Play / App Shortcut Key -
APPS
Applications -
APP 2
Netflix / App Shortcut Key -
HOME
Home -
UP, DOWN, LEFT, RIGHT, OK
Navigate the Menu -
EXIT
Exit -
MENU
Menu -
BACK
Back on level in the Menu -
RED, GREEN, YELLOW, BLUE
Fastext -
VOL + / –
Volume Up and Down -
OPTION
Option, Tools -
PR + / –
Channel Up and Down -
MUTE
Mute -
STOP, PLAY, REC, REW, PAUSE, FF
Playback control -
0-9
Digits for Channel Entry -
LAST CHANNEL
Previous Channel -
INFO
Info
SET-UP
SET UP YOUR TELEVISION
THE MAJORITY OF NEWER PANASONIC TV’S SHOULD WORK DIRECTLY. After putting
batteries in, just test some of the keys, and if they work, your remote is
ready. If not, follow the next steps:
- Make sure your TV is on (not on standby).
- Hold down Red + Blue until the LED behind the Power Key blinks twice.
- Point towards the TV and hold down the Power key until the TV turns off
- The remote will send a different Power signal every 3 seconds. As soon as the TV turns off, let go of the Power key.
- The light will blink twice. Now test the rest of the keys on the remote, if they work as your original did, your remote is ready to use. If you find some keys do not work as expected (or at all), proceed to the next step.
- If you find some keys still do not work as expected (or at all), proceed to the next step.
IF STEP 1 DOES NOT WORK AS EXPECTED
ARE SOME KEYS NOT WORKING AS EXPECTED?
If you find some keys do not work as expected (or at all), proceed to the next
step.
- Make sure your TV is on (not on standby).
- Hold down RED + BLUE until the LED behind the Power Key blinks twice
- Point towards the TV and hold one of the keys that is not working correctly (for example Menu).
- The remote will send a signal every 3 seconds.
- When the correct function is shown on the screen (in this case the Menu), let go of the key.
- The LED will blink twice – your remote is ready to use.
LEARNING
LEARN A NEW FUNCTION TO YOUR REMOTE
Your One For All remote can learn any function from your original (working)
remote.
-
Place the original remote facing the One For All remote on a flat surface.
-
To learn: Hold down GREEN + YELLOW until the LED blinks twice.
-
Press 975. The LED will blink twice.
-
Press the key on the One For All remote you want to learn on, for Example: the VOL + key. The LED will blink rapidly.
-
Press the key on the Original remote you want to learn, for
Example: the VOL + key of your Audio Device -
Two blinks: ok. Repeat from step 4 for any more keys to learn.
Long blink: try again from step 4. -
When you have learned all the keys you need, press and hold the OK key for 3 seconds. The LED will blink twice.
HOW TO DELETE A LEARNED FUNCTION
- Hold down GREEN + YELLOW until the LED blinks twice.
- Press 976.
- Press the key to reset twice.
- The LED flashes twice and the key will revert to the original function.
SOUND BAR / AUDIO RECEIVER VOLUME CONTROL
SOUND BAR / AUDIO RECEIVER VOLUME CONTROL
If you have your TV connected to a Sound Bar or Audio Receiver, it’s possible
to set up your One For All remote to control the Volume and Mute of this
device. There are two ways to do this:
AUDIO SIMPLEST
If you have a Sound Bar or Audio Device from one of the brands listed in the
table below, you can use the SimpleSet method to program your remote to
control it. If you do not have one of the below brands, please proceed to the
next section.
Note that each of the brands has a digit associated with it, for example
4 for LG (and JVC).
To set up your remote to control your Sound Bar / Audio Device, first make
sure your TV and Sound Bar / Audio Device are both powered on, and that there
is something playing that you can hear (this procedure will test the Mute
function). Next:
- Hold down the VOLUME UP and VOLUME DOWN buttons together until the LED under the POWER key blinks twice.
- Now point the remote towards your Sound Bar / Audio Devices and hold down the digit key for your brand (for example 4 for LG). The remote will send the Mute function to your device every 3 seconds.
- As soon as your Sound Bar / Audio Device mutes the volume, release the digit key. The LED under the Power key will blink twice, and the Volume Up, Down and Mute keys should now control your Sound Bar / Audio Device.
AUDIO CODE SETUP
If your Sound Bar / Audio Device is not one of the brands listed above, you can also set up the remote to control it by entering a 4 digit code. The codes are listed in the Audio Codelist section of this manual, and are listed by brand and then popularity. Locate the brand of your Sound Bar / Audio Device in this code list and then the procedure is:
- Hold down the VOLUME UP and VOLUME DOWN keys until the LED under the Power key blinks twice.
- Enter the first 4 digit code for your Sound Bar / Audio Device. The LED should blink twice on the last digit.
- Now try the Volume Up, Down and Mute and see if they control your Sound Bar or Audio Device.
- If they work, your remote is set up. If not try again from step 1 using the next code in the list.
POWER MACRO
If you have set up your Sound Bar or Audio Device using SimpleSet or Code
Setup, you can now turn your TV and Audio Device both on and off using a
single key. Simply hold down the Power key for 3 seconds and the remote will
send the Power function to both the TV and the Audio Device / Sound Bar. If
you press and release the key, it will only control the TV.
APP SHORTCUT KEYS
The One For All remote features three App Shortcut Keys which can be used to open apps on your TV. If your original remote control has a Viera Link, Netflix, or Freeview Play key, these keys will perform the same function. However if you try these keys and they do not work, but your TV still has the ability to watch a streaming service, you can use this key as a shortcut by programming a macro (a series of button presses) on it. You could also program the keys to access other apps on your TV.
To program the macro, you first need to know the sequence keys you use to
access the service. For example, some TVs will start Netflix by pressing the
Home key, then Menu Right twice, and finally the Enter key.
Once you have determined the sequence for the app you want on your TV, follow
these steps:
- Sit in front of your device with It switched on (not on standby)
- Hold down the App Shortcut key until the LED blinks twice.
- Now perform the sequence of keys exactly as would normally. The remote will operate your TV and the macro is recorded in real time – so if it normally takes a few seconds for your device to react don’t worry.
- Once you have finished the sequence – and the Streaming Service has started on your device – hold down the App Shortcut key until the LED blinks twice and goes out. The macro is now stored.
Tips
- Make sure the OFA remote Is operating the TV before programming
- If you find the Macro doesn’t work as expected, you can just repeat the same sequence to reprogram
- When programming, wait for your TV to respond first, the remote will remember the timing
RESET
If you would like to reset your remote back to its default settings, please do
the following:
- Hold down the Green and Yellow keys until the LED blinks twice
- Press 977
- The LED will blink 4 times and the remote is now reset.
PRODUCT DISPOSAL (EUROPEAN DIRECTIVE 2012/19/EU)
The crossed out wheeled bin symbol on this product ensures that this product is manufactured using high quality components that can be recycled and reused according European Directive 2012/19/EU. Please do not dispose of this product with your normal household waste, refer to local regulations for the proper collection or disposal of electrical and electronic products. This will help this will help in preventing negative effects on the environment and/or human health.
BATTERY DISPOSAL (EUROPEAN DIRECTIVE 2006/66/EC)
Please do not dispose of your batteries with your normal household waste,
refer to local regulations for the proper collection or disposal. This will
help preventing potential negative effects on the environment and/or human
health.
GUARANTEE TERMS AND CONDITIONS UNIVERSAL ELECTRONICS
warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of 3 years from the date of original purchase. This product will be repaired or if necessary, replaced free of charge if it has been proven to be defective within the 3 year warranty period. The forwarding costs are on the account of the owner; the costs of returning the product are on the account of UNIVERSAL ELECTRONICS. This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL ELECTRONICS, or which result from not mounting the product according to manual instructions. This also applies when the product has been modified / repaired by others than UNIVERSAL ELECTRONICS or if a fault is the result of accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, improper maintenance, alteration, modifications, fire, water, lightning, natural disasters, wrong use or carelessness. To obtain warranty service during the warranty period contact […], and please note that we need your original purchase receipt so that we may establish your eligibility for service. If you have bought this product for purposes which are not related to your trade, business or profession, you may have legal rights under your national legislation governing the sale of consumer goods . This guarantee does not affect those rights. www.oneforall.com
Connect with us
Universal Electronics BV – Europe & International P.O. Box 3332, 7500 DH
Enschede The Netherlands
URC 4914 Panasonic:
PANASONIC® is a registered trademark of Panasonic Corporation
References
- Home | One For All
- Call Center: outsourcing telemarketingu i obsługi klienta | ContactCenter
- Web Server's Default Page
- EMOS - drobné elektro pro vás | Nakupujte výhodně | EMOS
- Világítástechnikai és elektronikai eszközök webáruháza | EMOS.hu
- EMOS - drobné elektro pre vás | Nakupujte výhodne | EMOS.sk
- Home | One For All
- Tehnocentar
- Смарт аксесоари за телефони и таблети - SmartStyle
- EMOS kakovostni električni izdelki | EMOS - Slovenija
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>