ONE FOR ALL URC1919 Toshiba TV Replacement Remote User Manual

June 12, 2024
ONE FOR ALL

ONE-FOR-ALL-logo

ONE FOR ALL URC1919 Toshiba TV Replacement Remote

ONE-FOR-ALL-URC1919-Toshiba-TV-Replacement-Remote-
product

Product Information

  • The One For All remote is a versatile device that can learn any function from your original remote. It is compatible with most brands and models of audio devices, televisions, and other appliances.
  • With the One For All remote, you can easily program and customize the buttons to suit your needs. The remote features LED indicators that provide feedback during the learning process.

Product Usage Instructions

Learning a New Function

  1. Place the original remote facing the One For All remote on a flat surface, approximately 2-5 cm apart.
  2. Press the key on the original remote that you want to learn. For example, the VOL+ key of your audio device.
  3. To learn the function, hold down the GREEN + YELLOW buttons on the One For All remote until the LED blinks twice.
  4. If the LED blinks twice, it means the learning was successful. Repeat from step 4 for any more keys you want to learn. If the LED blinks once for a longer duration, try again from step 4.
  5. Press 975 on the One For All remote. The LED will blink twice.
  6. Press the key on the One For All remote that you want to assign the learned function to. For example, the VOL+ key.
  7. Once you have learned all the keys you need, press and hold the OK key for 3 seconds. The LED will blink twice to confirm.

Deleting a Learned Function

  1. Hold down the GREEN + YELLOW buttons on the One For All remote until the LED blinks twice.
  2. Press 976 on the One For All remote.
  3. Press the key you want to reset twice.
  4. The LED will blink twice, indicating that the learned function has been deleted and the key has returned to its original function.

Please note that these instructions are provided as a general guide. For specific instructions or troubleshooting, refer to the user manual that came with your One For All remote.

SET UP THE TELEVISION

THE MAJORITY OF THE NEWER TOSHIBA TELEVISION SHOULD WORK DIRECTLY.
Test after inserting the Batteries some keys. If those work is your remote control ready to use. If not, follow the next steps:

  1. Make sure the TV is on (not on standby). Press and hold RED AND BLUE until the LED behind the on/off button flashes twice.
  2. Point towards the TV and hold the POWER button pressed until the telly turns off.
    • The remote control is now sending another one every 3 seconds switch-off signal. Release the POWER button as soon as the TV turns off.
    • In this case, the LED lights up twice on. Now test the rest buttons on the remote control. If this like on your original remote work, your remote control is ready to use.

END
If you find some keys still not properly (or not at all) work, drive proceed to the next step.

IMPROPER FUNCTIONS

FUNCTION SOME KEYS NOT PROPERLY?
If you find some keys improperly (or not at all) work, go with that next step.

  1. Make sure the TV is on (not on standby). Press and hold RED AND BLUE until the LED behind the on/off button flashes twice.
  2. Point towards the TV and hold down one of the keys that not working properly, pressed (for example MENU).
    • The remote control now sends all 3 seconds a signal. If the correct function on the screen is displayed (in this case MENU), release the button.
    • The LED flashes twice – yours Remote control is ready for use.

END

LEARNING

START:
LEARN A NEW FUNCTION TO YOUR REMOTE Your One For All remote can learn any function from your original (working) remote.

FUNCTION TO YOUR REMOTE

  1. Place the original remote facing the One For All remote on a flat surface.

  2. To learn:
    Hold down GREEN + YELLOW until the LED blinks twice

  3. Press 975
    The LED will blink twice.

  4. Press the key on the One For All remote you want to learn on, for Example: the VOL + key

  5. Press the key on the Original remote you want to learn, for Example: the VOL + key of your AUDIO Device

  6. Two blinks: ok. Repeat from step 4 for any more keys to learn.
    Long blink: try again from step 4.

  7. When you have learned all the keys you need, press and hold the OK KEY for 3 seconds. The LED will blink twice

FINISH

HOW TO DELETE A LEARNED FUNCTION

  1. Hold down GREEN + YELLOW until the LED blinks twice.
  2. PRESS 976.
  3. Press the key to reset twice.

The LED flashes twice and the key will get back the original function.

PRODUCT DISPOSAL (EUROPEAN DIRECTIVE 2012/19/EU)
The crossed-out wheeled bin symbol on this product ensures that this product is manufactured using high-quality components that can be recycled and reused according to European Directive 2012/19/EU. Please do not dispose of this product with your normal household waste, refer to local regulations for the proper collection or disposal of electrical and electronic products. This will help in preventing negative effects on the environment and/or human health.

BATTERY DISPOSAL (EUROPEAN DIRECTIVE 2006/66/EC)
Please do not dispose of your batteries with your normal household waste, refer to local regulations for the proper collection or disposal. This will help prevent potential negative effects on the environment and/or human health.

GUARANTEE TERMS AND CONDITIONS

UNIVERSAL ELECTRONICS warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of 3 years from the date of the original purchase. This product will be repaired or if necessary, replaced free of charge if it has been proven to be defective within the 3-year warranty period. The forwarding costs are on the account of the owner; the costs of returning the product are on the account of UNIVERSAL ELECTRONICS.

This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL ELECTRONICS, or which result from not mounting the product according to manual instructions. This also applies when the product has been modified/repaired by others than UNIVERSAL ELECTRONICS or if a fault is the result of an accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, improper maintenance, alteration, modifications, fire, water, lightning, natural disasters, wrong use or carelessness.

To obtain warranty service during the warranty period contact […], and please note that we need your original purchase receipt so that we may establish your eligibility for service. If you have bought this product for purposes that are not related to your trade, business or profession, you may have legal rights under your national legislation governing the sale of consumer goods. This guarantee does not affect those rights. www.oneforall.com.

Separate the waste – Separa Y Recicla

ONE-FOR-ALL-URC1919-Toshiba-TV-Replacement-Remote-fig-
\(12\)

http://www.oneforall.com/documents

2410 284800 | ofa@dtsa.gr | www.dtsa.gr | www.oneforall.com.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals