ONE FOR ALL SV9215 Ultra Flat Indoor TV Antenna Installation Guide

ONE FOR ALL SV9215 Ultra Flat Indoor TV Antenna

Product Information

The SV9215 is a radio equipment type product manufactured by Universal Electronics BV. It is in compliance with Directive 2014/53/EU. The full text of the EU conformity declaration can be found on the official website of Universal Electronics BV at the following address: http://www.oneforall.com/doc_sv9215

Product Usage Instructions

To ensure safety while using the SV9215, please follow these instructions:

1. Ensure that the power plug to mains is easily accessible and not blocked or covered. This will allow you to disconnect the device easily in case of any issues.

Guarantee Terms and Conditions

UNIVERSAL ELECTRONICS provides a 3-year warranty for the SV9215. The product will be repaired or replaced free of charge if it is proven to be defective within the warranty period. The owner is responsible for the forwarding costs, while the costs of returning the product are covered by UNIVERSAL ELECTRONICS. To obtain warranty service, contact […]. Please keep your original purchase receipt as it may be required for eligibility. This guarantee does not affect any legal rights you may have under your national legislation governing the sale of consumer goods.

Hereby, Universal Electronics BV declares that the radio equipment type SV9215 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.oneforall.com/doc_sv9215

GUARANTEE TERMS AND CONDITIONS / SAFETY

• UNIVERSAL ELECTRONICS warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of 3 years from the date of original purchase. This product will be repaired or if necessary, replaced free of charge if it has been proven to be defective within the 3 year warranty period. The forwarding costs are on the account of the owner; the costs of returning the product are on the account of UNIVERSAL ELECTRONICS
• This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL ELECTRONICS, or which result from not mounting the product according to manual instructions. This also applies when the product has been modifi ed / repaired by others than UNIVERSAL ELECTRONICS or if a fault is the result of accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, improper maintenance, alteration, modifi cations, fi re, water, lightning, natural disasters, wrong use or carelessness.
• To obtain warranty service during the warranty period contact […], and please note that we need your original purchase receipt so that we may establish your eligibility for service. If you have bought this product for purposes which are not related to your trade, business or profession, you may have legal rights under your national legislation governing the sale of consumer goods. This guarantee does not aff ect those rights.

SAFETY PRECAUTIONS:

• For safety reasons, ensure that the power plug (to mains) is easily accessible (not blocked or covered) so it can be used to disconnect the device.
• Unplug the product if intended for cleaning. Never try to dismantle the product or push any object inside. May cause short circuit or electric shock.
• Clean the product by wiping with dry slightly damp cloth. This may only be dry-dusted.
• Keep a minimum distance of 5 cm around the product for sufficient ventilation.
• Check and ensure that the ventilation is not impeded by covering the openings with items such as newspaper, tablecloth, curtain, etc.
• Do not place near open flame sources, such as lighted candles.
• To reduce the risk of fire or electric shocks do not expose this apparatus to rain or moisture, dripping or splashing.
• Use the product only in moderate climates (not in tropical climates). It is not advisable to place the product in direct sunlight or in extreme weather.
• This product is not intended for use by children.

Power adapter UK

• Model: HS0501000B
• Input voltage : 100-240 V
• Input AC frequency: 50/60 Hz
• Output voltage: 5.0 VDC
• Output current: 1.0A
• Output power: 5.0W
• Average active efficiency: 74.48 %
  No-load power consumption: 0.059W Class II equipment. Adapter enclosure is double insulated. Risk of electric shock, do NOT open !

BOX CONTENT

To completely remove power from the antenna, disconnect the power adaptor from the power socket.

START **

**

FIND LOCAL TRANSMITTER

Point your antenna in the direction of the nearest transmitter for best reception and most channels possible. For closest transmitter, check www.ofa.com/antenna or look at roof aerials in your local areas. Or download the FREE OFA Assistant App.

Download the FREE antenna setup App

POSITION THE ANTENNA

FIND CHANNELS

For detailed instructions on how to perform a channel scan, please see the manual provided with your TV.

FINE TUNING

• For better signal strength and/or quality, try different locations, by moving it near a window and/or rotate it at current position.

• Once the antenna is adjusted for the best signal and quality carry out ANOTHER full autotune to make sure no channels were missed.

FINISH

WWW.ONEFORALL.COM/TIPS-AND-TRICKS

Connect with us

• facebook.com/oneforallworldwide
• @oneforall.worldwidecompany/one-for-all-worldwide/
• linkedin.com
• youtube.com/user/oneforallproducts

References

• One For All - One For All
• Home | One For All
• Home | One For All
• One For All Assistant app | One For All
• oneforall.com/doc_sv9215
• Tips and Tricks for your TV Antenna | One For All

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>