NUVO 60-5934 Jamesport 3 Lights 100W Matte Black Instruction Manual
- June 12, 2024
- NUVO
Table of Contents
NUVO 60-5934 Jamesport 3 Lights 100W Matte Black
Product Information
- Product: SKU#60/5934
Assembly Instruction
- Note: Please consult a qualified electrician if you are not certain of the installation.
- Caution: Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Product Usage Instructions
- Fasten the provided 2 mounting screws to the cross bar to outlet box using 2 outlet box screws provided.
- Abroche los 2 tornillos de montage provisos a la barra cruzada a la caja de salida usando 2 tornillos de la caja de fusible desde la caja de fusible.
ASSEMBLY INSTRUCTION
NOTE: Please consult a qualified electrician if you are not certain of
the installation.
CAUTION: Before starting the installation, disconnect the power by
turning off the circuit breaker or by removing the fuse at the fuse box.
- Fasten the provided 2 mounting screws to the cross bar to outlet box using 2 outlet box screws provided. (Make sure the thread of the mounting screws are facing outside when the cross bar is attached to the outlet box)
- Connect wires with white to white and black to black, cover the connections by using the Wire Connectors provided. Attach the fixture grounding wire to the mounting plate with the green grounding screw. Then connect it to the house grounding wire with a wire Connector.
- Place the fixture body to the wall by aligning the protruding mounting screw all the way through the wall plate and tighten the fixture using 2 lock nuts provided. Fasten the fixture until it is held firmly to the wall.
- Install bulb (Not included). Place the top cover onto the top of the lamp compartment, and secure in poison using the decorative head screws provided.
- Thread the nipple into the bottom of lamp compartment. Screw the tail section onto the bottom of nipple.
- Use weather resistant caulk to seal around top and side perimeter of fixture back plate. Do not caulk bottom to allow for condensation evaporation.
- Turn on the power
Read User Manual Online (PDF format)
Loading......