VIVOTEK AW-IHB-0800 Industrial Unmanaged 90W bt PoE Switch Installation Guide

June 12, 2024
Vivotek

AW-IHB-0800 Industrial Unmanaged 90W bt PoE Switch
Installation Guide

INTRODUCTION

The AW-IHB-0800 is an industrial unmanaged switch that supports 4x GbE 90W bt PoE, 2x GbE UTP, and 2x GbE SFP ports. It’s IEEE 802.3af/at/bt compliant and delivers the real full-load output of 360W on 4 PoE ports (up to 90W per port).
This industrial PoE switch also features a wide operating temperature range from -40ºC to 75ºC for harsh environment.

PACKAGE CONTENTS

  • 1x PoE switch
  • 1x DIN rail bracket
  • 1x Quick Installation Guide
  • 1x 4-pin terminal block

IMPORTANT:

  1. Install the converter in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust
  2. Make sure the ventilation openings on the converter are not blocked.
  3. Use fiber optic cables and transceiver compliant with the following: Multi-mode: 50/125um, 62.5/125um, 850nm; Single-mode): 9/125um ,1310nm.
  4. DC input: 48V-56VDC for 30W 802.3at/af. DC input: 52-56VDC for 90W 802.3bt Follow the printed polarity for V+, V-, and Ground.

CONNECTION

  1. Pull out the 2-pin terminal block.
  2. Connect power wires to V+, and V- (54V-56VDC). Use a flat blade screwdriver to secure the wire-clamp screws.
  3. Connect SFP transceivers to the fiber port.
  4. Install the 2-pin terminal block, and check power LED.
  5. The switch must be grounded properly by using a ground wire to connect switch ground screw to earth ground, otherwise, the surge protection level will be greatly reduced.VIVOTEK AW IHB 0800 Industrial Unmanaged 90W bt PoE Switch - Description

IMPORTANT:
Ground screw *

Make sure the groaning resistance is lower than 0.50.
Solid or stranded (AWG): 12-24/14-22
Wire strip length: 7-8mm
Torque: 51b-In/0.5Nm/0.56Nm

VIVOTEK AW IHB 0800 Industrial Unmanaged 90W bt PoE Switch - Wire strip
length

DC: 48V – 56V for 30W at/af
DC: 52 – 56VDC for 90W bt

Power LEDs

LED Color State Description
Power Amber On The switch is powered on correctly.
Off Not receiving power from power 1 or power 2.
PoE Link Amber On PD is detected on the designated port.
Off No PD is detected.
Data Link Green On Tx link is detected.
Off Link is not detected.
Flashing Data is being transmitted or received.
SFP Link Green On Fiber link is detected.
Off Fiber link is not detected.
Flashing Data is being transmitted or received.

All specifications are subject to change without notice.
Copyright © 2022 VIVOTEK INC. All rights reserved.

VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho,
New Taipei City, 235, Taiwan, R.O.C.
T: +886-2-82455282
F: +886-2-82455532
E: sales@vivotek.com
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
T: 408-773-8686
F: 408-773-8298
E: salesusa@vivotek.com
VIVOTEK Europe
Zandsteen 15, 2132 MZ Hoofddorp Delta Electronics
T:+31 (0)20 800 3817
E: saleseurope@vivotek.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals