LLOYD S LC-1350 Hexagon LED Lights User Guide
- June 12, 2024
- LLOYD S
Table of Contents
- Characteristics
- Contents
- Diagram
- Before getting started
- Registration and access
- Add device
- Device control
- Scenes creation
- How to configure with Siri Shortcuts
- Google Assistant and Amazon Alexa
- Maintenance
- Cautions
- FCC Statement
- FCC Radiation Exposure Statement
- Warranty (USA only)
- Electrical specifications
- Documents / Resources
Hexagon LED lights
Brand: Lloyd’s
Model: LC-1350
Uoyds® helps you make your Home a Srmart Home
Take control from one single app and transform your spaces
into safe, effcient, comfortable and fun places. QUICK
GUIDE
PLEASE READ THE INSTALLATION GUIDE BEFORE OPERATING THE PRODUCT “Operation is subject to two conditions:”
- This equipment or device may not cause harmful interference.
- This equipment or device must accept any interference. Including interference caused by the undesired operation.
This appliance is not for persons (including children) whose physical,
sensory, or mental capacities are different, reduced, lack experience or
knowledge.
Supervise children to ensure that this device is not used as a toy.
Characteristics
- Device remotely controllable from anywhere through the app 6 Wide range of colors (RGBIC)
- Create an original design with six removable hexagonal panels
- Thanks to the integrated IC chip, design your figures, customizing the color of each hexagonal LED
- Turn on/off manually, from the app, or by voice commands
- No HUB required
- Multi-user
- Lighting: 50 Im
- Power consumption: 1.2 W
- Material: ABS plastic + PP
- Six hexagonal LEDs (SMD5050)
- Size of each hexagonal panel: 10.16 cm x 10.16 cm x 2.5 cm
- 1.5 m USB power cable
- Lifespan: 50 000 hours
- Indoor use
- temperature: 14 °F – 95 °F 7 Use of Bluetooth for a quick setup
- Light colors sync to the beat of the music from the app or via the device’s built-in microphone
- Energy-saving: create different on/off schedules for optimal lighting I control
- From the app, turn on/off, adjust brightness, schedule times, and color I even when away from home
- Compatible with Amazon Alexa and Google virtual assistants
- Compatible with Siri Shortcuts through routines created from the app
- Allows you to create routines that trigger actions in other Lloyd’s Smartti I products
Contents
Diagram
Installation Place the hexagonal LEDs face down in the desired
order and attach them using the USB power connectors. The arrows on the
connectord should be facing up and pointing towards the primary unit (seei
diagram) connected to the power supply (not included).
Use the triangular connectors between each LED to reinforce their) connection.
-
Wall mounting
1- Apply double-sided tape to the back of each hex LED.
2- Clean and dry the designated surface where you want to install the device.
3- Flip the structure of the hex LEDs over and press it against the desired location for at least 10 seconds.
4- Examine the lights to make sure they are firmly attached. -
Surface mounting
1- Apply double-sided tape to the back of one of the Hex LEDs (make sure it is the one that is at the bottom so it can support the rest of the LEDs).
2- Place the lights vertically on a flat surface and press the surfaci stand against the adhesive. Make sure the short side of it is facing down.
Connect the power cable to the primary unit (see diagram), then plug the other end to a USB power source.
NOTE: -
You can use any hexagonal LED as primary unit.
-
Check the markings on the ends of the USB power cable, as one is intended for a USB power source and the other for the primary unit.
Before getting started
Make sure your smartphone has iOS 10.0 or nigher or AndroidTM 4.4 or higher.
Check your network and make sure you are connected to 2.4 GHz Wi Fi channel.
Download the Lloyds Smart app from the App Store or on Google Play or scan the
following OR code with your smartphone.
Registration and access
Launch the Lloyds Smart app. To continue, click “I agree”. To registed click on “Sign Up” (1), choose your country and enter an email address, then click “Get verification code” (2).Enter the code sent to your email (check inbox or span)) (3), set a (password, and dick “Done” (4). Or log in directly if you already have and account.
Add device
Wake sure to activate the Bluetooth function on your Smartphone. Open the
Lloyds Smart lapp, select “+” in the upper right corner (1), and click on
“Automatic scan” (2).Connect the device to the power supply. (The lights
will turn on in white and then flash red. Should they not turn on, press /and
hold the controller button for 10 seconds When the device appears in Ithe app,
click ‘Add’ (3).
Enter your Wi Fi network information land password, then dick ‘Next’ (4).
price the device is configured, you can ‘change the name (5). Finally, rJick
on pone” (6).
NOTE: Make sure that the Wi Fi password you enter is correct and that the
device is close to the modem during the process.
After completing the setup, find and select the device in the list (7) to
Control it through the app from wherever you are. Only internet connection is
required.
Device control
- More functions
- Click to view custom scenes
- Press to view preset scenes
- Select from preset scenes
- On/Off
- Scene selection interface
- Create custom scenes
- Light color sync with the rhythm of the music ‘
- On/Off scheduling
Scenes creation
- Color transition effects
- Enable/Disable selection of grouped hexagonal LEDs
- Enable/Disable selection of the hexagonal LEDs individually
- Adjust the LED color: solid or gradient
- Choose from a wide range of colors
- Increase or decrease brightness (takes effect for all the hexagonal LEDs)
- Scene preview
- Save scene (you can view the custom scenes in the scene selection interface).
NOTE Touch the center of any hex LED to change the color (it only works as long as the LEDs are showing a fixed color and when not connected to a Wi Fi network). In “More functions” (interface upper right corner), you will be able to, 6name the device, share control of it with family and acquaintances, access] nformation, create groups, update the firmware or delete the device.
NOTE The name that you assign to the device will be the one that you use with your Alexa or Google Assistant-enabled device for voice control.
How to configure with Siri Shortcuts
Lloyd’s Smart products are compatible with ISiri Shortcuts through routines created from the app. For configuration details, scan the ‘following QR code with your smartphone:
Make sure your smartphone has iOS 12 or higher.
Google Assistant and Amazon Alexa
How to connect to Google Assistant:
- Download and launch the Google Home app, previously configured with your Gmail account and your Google Assistant-enabled device.
- Click on the “+” icon, choose “Set up Device,” then in the “Works Google” section, click on the search bar and type in Lloyds Smartl When you get the icon, click on it. Enter your Lloyds Smart account and (click on “Link now”. Then press on “Authorize” and wait a few seconds)
- Once you have linked Lloyds Smart, the devices added to your] account will be displayed, click on “X” (top left corner) and return to the, ‘main screen. Now you can control your Lloyd’s Smart devices using jus.6 iyour voice with Google. –
NOTE: You can rename the devices from the Lloyds Smart app to control them with voice commands. Every time you rename the devices, say: “-00poHey Google, sync devices” or update from the Google Home app.
Try saying “Hey Google” followed by one of the following commands: ”
Hey Google, turn on the living room lights”
“Hey Google, turn off bedroom lights”
“Hey Google, change the study light to green color”
“Google, Android, Google Play and Google Home are trademarks of Google LLC.”
How to conned to Amazon Alexa:
- Download and access the “Amazon Alexa” app, previously I configured with your email account and your virtual assistant.
- Click on the option “Skills & games”, then in the search bar type Lloyds Smart. When you get the icon, click on it. Then press the “Activate to use” button.
- Enter your Lloyds Smart account, click on “Link Now” and finally “Authorize”. You will get the message “Linked successfully”, click on I “Close” and wait a few seconds. toll Click “Detect devices” to find the smart devices. Now you can ask ‘ your assistant to control them by voice commands.
NOTE: You can rename the devices from the Lloyds Smart app to control them with voice commands. Every time you rename the devices, say: “Alexa, sync devices” or update from the Amazon Alexa app.
Voice command examples:
“Alexa, turn on living room lights” “Alexa, turn off bedroom lights” “Alexa,
change study lights to green color”
NOTE. The Google Home and Amazon Alexa apps are constantly being updated.
For more information, please refer to their user manuals.
Maintenance
- Disconnect the decorative product from the power supply before 1 performing any maintenance or cleaning activities.
- Do not expose it to direct sunlight.
- For cleaning use a dry cloth without abrasive liquids.
Cautions
To reduce the risk of fire and electric shock:
- Do not install or place near gas or electric heaters, fireplaces, candles or other similar heat sources.
- Unplug the product when leaving the house, when retiring to sleep, or if left unattended.
- Do not hang decorations or other objects on the cord, cable or light 1 strip.
- Do not cover the decorative product with cloth, paper or any material) that is not part of the product when in use.
- Do not install the decorative lights in a manner that may cut or damage the wire insulation. ,0 Do not disassemble or modify the product. 10 Please keep the product away from liquids and don’t use it with wet hands.
- Not to be used in case the power cord is damaged. 10 Do not attempt to power more than 6 panels with a single USB powe ‘ cord.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject ‘to
the following two conditions: 1(1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may Cause undesired operation. Warning: Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
How-Ter, toffee—rest no guarantee that Tit effete-Ce will ndroctUr in a I
particular installation. If this equipment does cause harmful interference! to
radio or television reception, which can be determined by turning the,
!equipment off and on, the user is encouraged to try to correct the
,interference by one or more of the following measures: 11- Reorient or
relocate the receiving antenna. 12- Increase the separation between the
equipment and receiver. 13- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. 4- Consult the dealer
or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
Warranty (USA only)
This product is warranted to last 1 year. If this product does not last the stated warranty period, please contact us at support@lbydscorp.com This product is not guaranteed against wear or breakage due to ,misuse and/or abuse.
Electrical specifications
POWER INPUT: 5V/2A FCC ID: 2ANDL-WB3L
“This device must only be used with the USB power cable supplied with it.”
IMPORTED INTO MEXICO BY:
ZUTTO TECHNOLOGIES, S. A. DE C. V.
Avenida Ejercito Nacional No. 505 Interior 1602, Col. Granada
Miguel Hidalgo, Ciudad de Mexico, Mexico C.P. 11520
Telefono: 55 68447575
R.F.C.: ZTE161017KT6
IMPORTED INTO THE UNITED STATES OF AMERICA BY:
Kayto Innovations LLC 2199 Ponce de Leon Blvd Ste 301 Coral Gables,
FL, 33134, USAIloydscorp.com
support@lloydscorp.com
Documents / Resources
|
LLOYD S LC-1350 Hexagon LED
Lights
[pdf] User Guide
LC-1350 Hexagon LED Lights, LC-1350, Hexagon LED Lights, LED Lights, Lights
---|---