Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio Instruction Manual
- June 12, 2024
- Victrola
Table of Contents
Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio
SAFETY INSTRUCTIONS
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT USE THIS PLUG WITH AN EXTENSION CORD,
RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
- Please read these instructions and keep them for future reference.
- Pay attention to all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings.
- Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus
- Protect the power cord from being walked on or kinked, where the Plug is fitted, and at the point where it exits from the apparatus.
- Only use attachments/ accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged, such as a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- This appliance should not be exposed to dripping or splashing water and no object filled with liquids, such as vases, should be placed on the apparatus.
- Do not overload the wall power outlet. Use only power source as indicated – i.e. 120V AC mains.
IMPORTANT NOTES
Avoid installing this unit in places exposed to direct sunlight or close to
heat-radiating appliances such as electric heaters, on top of other stereo
equipment that radiates too much heat, places lacking ventilation or dusty
areas, places subject to constant vibration, and/or humid or moist areas. Do
not attempt to clean this unit with chemical solvents as this might damage the
finish. Use a clean dry cloth. Operate controls and switches as described in
the manual. Before turning On the power, make sure the AC power cord is
plugged in. When moving the unit, be sure to first disconnect the power cord.
POWER SOURCE
This product is designed to operate on 120V 60Hz AC Mains only. Attempting to operate this system from any other power source may cause damage to the system, and such damage is not covered by your warranty. NOTE: This system is equipped with domestic standard AC power 2 plugs. If this plug does not fit into your existing AC outlet, do NOT try to defeat this safety feature by filing the wide blade to make it fit into your outlet. If this plug will not fit into your outlet, you probably have an outdated non-polarized AC outlet. You should have your outlet changed by a qualified licensed electrician.
PRODUCT OVERVIEW
FRONT VIEW
-
AM/ FM scale
-
AM/ FM pointer
-
TUNING knob
-
Speaker Grill
-
OFF/ Volume control
-
The power I LED Indicator
-
Adjustable Tone Control Knob (Bass and Treble)
-
AM / FM / BT Knob
REARVIEW
-
FM Antenna
-
AC power cord (Plugs into a wall outlet)
LISTENING TO FM RADIO
- Turn the unit ON, then rotate the AM / FM/ BT selector to select FM.
- Rotate the Volume Knob to adjust your desired volume level.
- Rotate the TUNING knob to select your desired station.
- Adjust the antenna (located on the back of the unit) to get the best reception.
LISTENING TO AM RADIO
- Turn the unit ON, then rotate the AM/ FM/ BT selector to select AM.
- Rotate the Volume Knob to adjust your desired volume level.
- Rotate the TUNING knob to select your desired station.
LISTENING TO AN EXTERNAL DEVICE (BLUETOOTH)
In Bluetooth Mode, this Unit can play music from external devices that are
Bluetooth Compatible.
CONNECTING YOUR BLUETOOTH DEVICE
- Turn the unit ON, then rotate the AM/ FM/ BT selector to select BT.
- Rotate the Volume Knob to adjust your desired volume level
- Turn ON the Bluetooth function on your external device.
- Open Bluetooth settings on your external device. Note: The effective distance between your external device and this unit is 10 meters (33 ft).
- Wait a moment for “VRS-2800” to appear on the device list of your external device’s Bluetooth setting, then select “VRS-2800”. If your device asks for a password enter “0000” and then press “OK”.
- When the Bluetooth connection has been established successfully you will hear an audible beep and the LED Indicator will remain lit.
- Start playback through your external device.
BASS AND TREBLE CONTROL
Turn the Tone Control Knob to your desired preference.
- To hear more Bass turn the knob to the left.
- To hear more Treble turn the knob to the right.
SPECIFICATIONS
GENERAL
- Power Requirements ………………………… AC 120 V~60Hz
- Power Consumption ………………………. 7W
- Dimensions (L x H x D) …………………. 9.4 in x 4.9 in x 6.1 in (approx) 240mm x 125mm x 155mm (approx)
- Weight ……………………………………………. 2.86 lbs (approx) 1.30 Kg (approx)
SPEAKER SYSTEM
- Type …………………………………………. 1-Way
- Impedance ………………………………….. 4 ohms
- Output power ………………………………. 3W
RADIO
- FM Range ………………………………… 87-108 MHz
- AM Range ………………………………… 530-1710 KHz
BLUETOOTH
- Bluetooth Version ………………………… Bluetooth V4.1
- Bluetooth Profile ………………………….. A2DP, AVRCP1 .4
- Bluetooth Frequency Range ……………. 2.40~2.48GHz
- Operating Distance ………………………. 1 O meters
TROUBLESHOOTING
For further assistance with your product, call Innovative Technology at
TOLL FREE# 1-877-ITECH-97
(1-877-483-2497).
Please note
As a result of continual improvements, the design, and specifications of
this product are subject to change without notice. Bluetooth is a registered
trademark of Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners.
Made in China.
FCC STATEMENT
Warning
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE
This equipment has been tested and found to comply with the limits for
Class B digital devices, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CALIFORNIA PROP 65
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
For more information go to www.P65Warnings.ca.go
WARRANTY
Victrola is a registered trademark of Innovative Technology Electronics LLC.
Innovative Technology Electronics LLC. Limited Warranty:
90 Days Labor, One Year Parts
Innovative Technology Electronics LLC. (IT) warrants the product to be free
from
“Defects” in materials under normal use for a period of “One Year” from the
date of the original purchase. The Warranty is “Not” transferable. IT agrees,
within the initial “90 Day” period, to repair or replace the product if it is
determined to be defective at “No Charge”. It is further agreed that IT will
cover the cost to repair or replace damaged “Parts” only for a total period of
“One Year” from the date of the original purchase. The warranty does not cover
cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage
due to line power surges, connection to improper voltage supply or settings,
misuse,
mishandling, accident, acts of God, or attempted repair by an unauthorized
service agent.
To obtain service, the purchaser MUST present an original sales receipt/proof of purchase. Please contact us at www.victrola.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to the sender.
Upon receipt of the returning item and our full inspection (IT) may issue a replacement to the customer for the same item or one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase, and reason for return to obtain RMA number.
All returns must be in the original packaging or a reasonable substitute to
prevent damage. Customer “Must” include full name, shipping address and
telephone number inside of package. No return will be shipped back to a PO Box
or APO address.
Please include your check or money order in the amount of:
- USD $5.00 for items $10.00 to $39.99. (Price Paid Per Unit)
- USD $10.00 for items $40.00 to $99.99. (Price Paid Per Unit)
- USD $16.00 for items $100.00 and up. (Price Paid Per Unit)
- Shipping fees are non-refundable.
to be payable to Innovative Technology Electronics LLC. (for handling and return shipping charges) (IT) will not be responsible for delays or unprocessed claims resulting from a purchaser’s failure to provide any/ all of the necessary information. Send all inquiries or RMA requests via our website www.victrola.com/pages/technical-support
Innovative Technology Electronics LLC.
1 Channel Drive
Port Washington, NY 11050
Toll free: 1-877-483-2497
Website for support: www.victrola.com/pages/technical- support
There are no express warranties except as listed above.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.
Frequently Asked Questions
What is the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio?
The Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio is a vintage-style radio that combines classic design with modern features. It allows you to listen to FM and AM radio stations and also supports Bluetooth connectivity for wireless audio streaming.
What are the dimensions of the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio?
The dimensions of the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio are approximately 11.8 inches (30 cm) in width, 7.3 inches (18.5 cm) in height, and 5.7 inches (14.5 cm) in depth.
Does the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio have a built- in speaker?
Yes, the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio features a built-in speaker, allowing you to listen to your favorite radio stations or Bluetooth-connected devices without the need for external speakers.
Can I connect my smartphone or other devices to the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio via Bluetooth?
Yes, the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio has Bluetooth functionality, allowing you to connect your smartphone, tablet, or other compatible devices wirelessly to the radio and stream audio.
Does the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio have an AUX input?
No, the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio does not have an AUX input. It primarily relies on Bluetooth and radio frequency reception for audio playback.
Can I listen to FM and AM radio stations with the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio?
Yes, the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio has a built-in FM/AM tuner, allowing you to listen to a wide range of radio stations.
Does the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio have a digital display?
No, the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio does not have a digital display. It features analog tuning dials for selecting radio stations.
Does the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio have a headphone jack?
No, the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio does not have a headphone jack. It is designed primarily as a speaker system for radio and Bluetooth audio playback.
Can I use batteries to power the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio?
No, the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio is powered by a standard AC power cord. It does not have a battery compartment.
Does the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio come with a remote control?
No, the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio does not come with a remote control. The radio is operated manually using the built-in knobs and switches.
Can I use the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio as a speaker for my turntable or other audio devices?
Yes, the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio can be used as an external speaker for audio devices that have Bluetooth capability. However, it does not have specific input ports for connecting external devices directly.
Is the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio compatible with voice assistants like Alexa or Google Assistant?
No, the Victrola VRS-2800-ESP Retro Wood Bluetooth FM/AM Radio does not have built-in support for voice assistants. It operates as a standalone radio and Bluetooth speaker without voice control features.
Video Overview Of Product
Download this PDF Link:Victrola VRS-2800-ESP Retro Wood Bluetooth FMAM Radio Instruction Manual