HYUNDAI 57707 14000W Vacuum Cleaner Instruction Manual
- June 4, 2024
- HYUNDAI
Table of Contents
HYUNDAI 57707 14000W Vacuum Cleaner
| WARNING
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
---|---
SAFETY WARNINGS
When using the machine, always observe the enclosed safety warnings as well as the additional safety instructions below.
ADDITIONAL SAFETY INSTRUCTIONS FOR WET/DRY VACUUM CLEANERS
- Use original accessories only.
- When picking up liquids, only use the accessories intended for this purpose.
- Do not connect any electrical equipment to the electronic power socket when using the machine to pick up liquids.
- Do not connect any electrical equipment to the electronic power socket that exceeds the maximum power rating of 2,000 W.
- Do not use the machine to pick up burning or smouldering debris, explosive or inflammable substances and liquids.
- Keep body parts away from the vacuum opening when the machine is running.
The following symbols are used throughout this manual:
| Denotes risk of personal injury or damage to the machine.
---|---
| Denotes
important information concerning the use of the machine.
ELECTRICAL SAFETY
| Always check that the power supply corresponds to the voltage on the rating
plate.
---|---
DESCRIPTION (FIG. A)
| Your wet/dry
vacuum cleaner has been designed for picking up dry dust and debris as well as
liquids.
---|---
- On/off switch
- Electronic power socket
- Motor housing
- Container latch
- Container
- Wheels
- Tube
- Hose
- Hose lock knob
- Hose connection
- Nozzle
Package contents
- Wet/dry vacuum cleaner
- Hose
- Tube
- Nozzle
- Crevice nozzle
- Brush nozzle
- Dust bag
- Foamed plastic filter
- HEPA filter
- Wheels (4x)
- Instruction manual
- Safety instructions
- Guarantee and service conditions
Mounting the trolley wheels
- Turn the trolley upside down.
- Place the wheel axle on the grooves at the rear and secure it with the two screws.
- Fit the swivel casters at the front by pressing the peg into the hole.
- Turn the trolley right side up.
BEFORE USE
| Before mounting an accessory, always unplug the machine.
---|---
Mounting accessories for picking up dry material
| The dust bag
must be used for picking up dry material.
---|---
- Remove the motor housing (3) from the container (5) by releasing the container latches (4).
- Place the dust bag in the container and slide it firmly over the hose connection (10).
- Replace the motor housing and click the container latches firmly shut.
- Connect the hose (8) to the hose connection (10).
Mounting accessories for picking up liquids
| The supplied
foamed plastic filter must be used for picking up liquids.
---|---
- Remove the motor housing (3) from the container (5) by releasing the container latches (4).
- Remove the dust bag from the container.
- Pull the supplied foamed plastic filter over the filter basket.
- Replace the motor housing and click the container latches firmly shut.
- Connect the hose (8) to the hose connection (10).
Connecting the hose
- Slide the hose lock knob (9) to the left, insert the end of the hose into the hose connection and release the lock knob.
- Place the tube (7) onto the other end of the hose.
- Place a nozzle (11) onto the other end of the tube.
USE
| Always check whether the correct accessories have been mounted before
switching on the machine.
---|---
For dry dust and debris
- Insert the mains plug into a mains outlet.
- Switch on the machine by setting the on/off switch (1) to position ‘I’.
- Switch off the machine by setting the on/off switch (1) to position ‘0’.
For dust produced by power tools
| The machine has
a socket for connection of power tools. The machine switches on and off
automatically when the power tool is used.
---|---
| The power rating of the power tool connected to the socket must not exceed
2000 W.
- Insert the mains plug into a mains outlet.
- Set the on/off switch (1) to position ‘II’.
- Plug the power tool into the electronic power socket (2).
- Connect the hose (8) to the dust extraction outlet on the power tool.
- Operate the power tool as described in the instructions.
- The machine switches on and off automatically when the power tool is used. It will continue to run for a few seconds after the power tool is switched off to collect any remaining dust.
- Switch off the machine by setting the on/off switch (1) to position ‘0’.
| The electronic power socket is not suitable for use as a regular mains
socket. Therefore never use the machine as a regular mains socket or as a
replacement for an extension lead.
---|---
For liquids
| Do not connect any electrical equipment to the electronic power socket when
using the machine to pick up liquids.
---|---
- Insert the mains plug into a mains outlet.
- Switch on the machine by setting the on/off switch (1) to position ‘I’.
- Switch off the machine by setting the on/off switch (1) to position ‘0’.
| The machine is
equipped with an overflow float that stops the suction power when the tank
gets too full. When this happens, switch off the machine, empty the tank and
switch on the machine again.
---|---
CLEANING AND MAINTENANCE
| Always remove the plug from the mains outlet before cleaning or maintenance.
---|---
Cleaning
After picking up dry material:
- Remove the dust bag.
- Discard or empty the dust bag.
- Fit the empty dust bag or a new one.
After picking up liquids:
- Remove the foamed plastic filter.
- Rinse the filter. Use only water.
- Dry the filter thoroughly.
- Fit the filter.
Maintenance
- Empty the container each time after using the machine to pick up liquids. Allow the container to dry thoroughly afterwards.
- Regularly clean the container using soap and water. Allow the container to dry thoroughly afterwards.
- Regularly clean the motor housing using a non-fluffy cloth or brush.
- Regularly clean the exhaust outlet using a non-fluffy cloth or brush.
- Regularly replace the dust bag. Always replace the dust bag when it is full.
TECHNICAL DATA
Mains voltage|
V~
|
230
---|---|---
Mains frequency|
Hz
|
50
Power rating|
W
|
1,400
Max. socket power|
W
|
2,000
Suction power|
kPa
|
19
Container capacity|
l
|
30
Weight|
kg
|
10.5
Noise
LpA (sound pressure level)*|
dB(A)
|
<82
---|---|---
*Uncertainty K=|
dB(A)
|
3
GUARANTEE
| Refer to the
enclosed guarantee conditions for the terms and conditions of guarantee.
---|---
ENVIRONMENT
| Your product, accessories and packaging should be sorted for
environmentalfriendly recycling.
---|---
Only for EC countries
Do not dispose of power tools into domestic waste. According to the European
Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that are no longer usable must
be collected separately and disposed of in an environmentally friendly way.
Subject to change; specifications can be changed without further notice.
Dvize bv
Witte Vlinderweg 51 1521 PS Wormerveer
info@dvize.eu
Nederland
www.hyundaitools-nl.com
Imported/Distributed by Dvize bv, The Netherlands
Licensed by Hyundai Corporation, Korea
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>