CRYSTORAMA 290-PN Grayson 1 Light Polished Nickel Pendant Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 290-PN Grayson 1 Light Polished Nickel Pendant Instruction
Manual
Dimensions
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 1-Medium Base Bulb 40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
This fixture is Dry rated
How to install
- Separate the mounting plate from the canopy kit by removing the screws.
- Install the mounting plate to the outlet box using two outlet box screws.
- Determine the preferred hanging height and adjust the required rods.
- Feed the wires through the rods and connect them together.
- Slip canopy kit along wire and thread it into the top of the rod assembly.
- Install canopy onto the mounting plate, and secure with the mounting screws.
- Install the bulb(not included) into the socket.
WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Part Number
A. (1)-Mounting hardware
B. (1)-Mounting plate
C. (2)-mounting screw
D. (1)-Canopy kit W5-7/8’’xH7/8’’ #XRF290PNCAN5.875IN
E. (1)-Rod D5/8’’xL6’’ #XRF290PNROD6IN
F. (3)-Rod D5/8’’xL12’’ #XRF290PNROD12IN
G. (1)-Top shade W5-3/4’’xH6’’ #XRF290PNSHA6IN
H. (4)-Cylinder nut
I. (1)-Bottom shade W5-3/4’’xH6’’ #XRF290PNBOTSHA6IN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>