SINGSATION ARIA All-In-One Karaoke System User Guide
- June 5, 2024
- SINGSATION
Table of Contents
SINGSATION ARIA All-In-One Karaoke System
QUICK START GUIDE
Step 1: Unpack
Make sure the following items came in this package:
- Singsation Aria All-In-One Karaoke System
- Microphone with Cable
- Charging Cable
- Remote Control
- Carry Strap
Step 2: Charge the Speaker
Plug one end of the charging cable into the DC5V jack on the top of the speaker. Plug the other end into a USB charging adapter (not included).
Step 3: Plug In the Mic
Plug the microphone cable into the MIC jack on the top of the speaker.
Step 4: Remove the Remote Battery
Pull the battery tab out of the bottom of the remote. The battery will start powering the remote so you can use it.
Step 5: Turn On the Speaker Move the ON-OFF switch on the top of the
speaker into the ON position. The speaker announces “Pairing.”
Note: When the speaker’s ON-OFF switch is in the ON position, you can use the
remote’s button to turn the speaker on and off.
Step 6: Pair With the Speaker
Make sure your phone’s Bluetooth is turned on. Select Singsation SPKA23 from
the available devices to pair to the speaker.
The speaker announces “Device connected” when it’s finished pairing and
connecting to your Bluetooth device.
Note: The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners manual for more information and specific instructions.
If you’ve previously paired your phone or other Bluetooth device with the Singsation Aria, it will automatically attempt to reconnect to that device when you switch it on. If you want to pair to a new device, turn off Bluetooth on the device that’s already paired to the speaker. The speaker announces “Pairing.”
Bluetooth Wireless Connection Tips
- Make sure the Bluetooth capability of your device is turned on.
- Make sure there’s nothing plugged into the Singsation Aria’s AUX jack when you’re trying to use Bluetooth.
- The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re having problems connecting to the speaker, move closer to it.
- If your device asks you for a password to connect, use “0000”.
Step 7: Start Playing Music
Turn your phone’s volume up to 75%. Then start playing music on your phone.
Step 8: Turn On the Mic and Sing Along!
- Move the microphone’s ON/OFF switch to the ON position and start singing!
- To adjust the music volume: Use the volume controls on your phone.
- To adjust the volume of music AND voice: Turn the VOL dial on the top of the speaker or the VOL– and VOL+ buttons on the remote.
- To play/pause the music: Press the button on the top of the speaker or on the remote.
- To skip to the next/previous track: Press the or button on the top of the speaker or on the remote.
Using Two Singsation Aria Speakers Together (TWS Mode)
If you have two Singsation Aria speakers, you can set them up to play together in True Wireless Stereo. To set up True Wireless Stereo:
- Make sure both speakers are on.
- Give a quick double press to the button on one of the Singsation Arias. The speaker plays a sound to indicate it’s ready for TWS pairing.
- Press and hold the button on the same speaker until you hear the speaker play a second sound. The speakers are now in TWS mode.
To return to single-speaker mode: Turn one of the speakers off (or press and hold the button on that speaker). Speakers return to TWS mode when they’re turned on again.
Using the Light Show
The Singsation Aria has a light show that turns on when the speaker is on by
default.
To turn off/on the speaker’s light show: Press and hold the button on the top
of the speaker.
Using Other Audio Sources
In addition to Bluetooth audio, the Singsation Aria has four other audio sources you can use: FM radio, USB memory, SD card, and an auxiliary input.
To use FM radio: Press the button on the top of the speaker. The first time you use the FM radio, press the button on the top of the speaker to scan available stations (this takes a few minutes to complete). Then use the or buttons to go to different radio stations.
To use a USB memory stick or SD card: Plug the memory stick or SD card
into the USB or TF slots on the top of the speaker. If there are MP3 music
files in the top directory of the memory stick or SD card, the speaker will
automatically start playing them.
Note: The speaker offers additional functions for music playback from an SD
card or USB memory stick. Press the EQ button on the remote to go through the
different EQ settings (the name of each is shown on the display). Press the
RPT button to repeat a track. These functions work for the USB memory stick or
SD card only.
To use an auxiliary audio source: Plug your auxiliary audio source into the AUX input on the top of the speaker using a 3.5mm audio cable (not included). The speaker automatically switches to the auxiliary input.
To return to Bluetooth audio: Press the button on the top of the speaker until the display says “BLUE.”
Tour of the Singsation Aria
Remote Control
- turns the speaker on and off if the speaker’s ON-OFF switch is in the ON position.
- Mode switches between the speaker’s audio sources: FM radio, USB memory, SD card, and AUX.
- mutes the audio.
- , , and play/pause, skip back, and skip forward for
- audio on the current input (except for AUX).
- EQ switches through the EQ presets for the SD card and USB inputs. The name of each preset is shown on the speaker’s display.
- VOL– and VOL+ adjust the volume of the speaker.
- Number keys select a song directly on the SD and USB inputs.
- RPT repeats the current song on the SD and USB inputs.
- U/SD has no function for this speaker.
Speaker Top Panel
- MIC jack Plug the included mic into this jack for karaoke!
- AUX input Plug an auxiliary audio source into this jack via 3.5mm cable (not provided).
- Display shows the current source and other information depending on the source (station for FM radio, EQ setting for USB and SD card, etc.).
- TF slot and USB port Insert an SD card or USB memory stick into this slot or port to listen to the music on those media.
- DC 5V jack Plug the included micro-USB charging cable into this jack. Then plug the other end into a USB power source to charge the speaker.
- OFF-ON turns the speaker on and off. Leave this switch in the ON position to turn the speaker on and off using the remote.
- , , and play/pause, skip back, and skip forward for audio on the current input (except for AUX).
- cycles through the speaker’s audio inputs. Press and hold to turn the speaker’s light show on and off.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>