SINGSATION-SPKA21-Party-Vib-All-In-Karaoke-System User Guide
- June 6, 2024
- SINGSATION
Table of Contents
SINGSATION-SPKA21-Party-Vib-All-In-Karaoke-System User Guide
Instruction
Step 1: Unpack
Make sure the following items came in this package:
- Singsation Party Vibe All-In-One Karaoke System
- Microphone
- Microphone Cable
- Charging Cable
Step 2: Charge the Speaker
Plug one end of the charging cable into theDC5V jack on the back of the
speaker. Plug theother end into a USB charging adapter (notincluded).
The indicator light next to the DC5V jack red while the speaker is charging.
Step 3: Plug-In the Mic
Plug one end of the microphonecable into the microphone.
Plug the other end into the MIC jackon the back of the speaker.
Step 4: Turn On the Speak
Move the ON-OFF switch on the back of the speaker into the ON position. The speaker announces “Power On,” and the indicator light on the back panel flashes blue to show that the speaker is in Bluetooth connection mode. After 15–30 seconds, the speaker announces “Pairing” and goes to Bluetooth pairing mode to set up with your Bluetooth device. The indicator starts blinking faster.
Step 5: Pair With the Speaker
Make sure your phone’s Bluetooth is turned on. Select Singsation SPKA21 from
the available devices to pair to the speaker. The speaker announces “Device
Connected” when it’s finished pairing and connecting to your Bluetooth device.
The indicator light on the back of the speaker turns solid blue.
Note : The process of enabling Bluetooth and connecting varies from
device to device. See your device’s owner’s manual for more information and
specific instructions.
If you don’t see Singsation SPKA21 in the list of devices available for
Bluetooth pairing, make sure the indicator n the back of the speaker is
blinking rapidly. If it isn’t, give a short double-press on the M button on
the top of the speaker. The speaker announces “Pairing.” If you’ve previously
paired your phone or another Bluetooth device with the Sensation Party Vibe,
it will automatically attempt to reconnect to that device when you switch it
on. If you want to pair to a new device, turn off Bluetooth on the device
that’s already paired to the speaker. The
speaker announces “Pairing.”
Bluetooth Wireless Connection Tips
- Make sure the Bluetooth capability of your device is turned on.
- Make sure there’s nothing plugged into the Singsation Classic’s AUX jack when you’re trying to use Bluetooth.
- The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re having problems connecting to the speaker, move closer to it.
- If your device asks you for a password to connect, use “0000”.
Step 6: Start Playing Music
Turn your phone’s volume up to 75%. Then start playing music on your phone.
Step 7: Turn On the Mic and Sing Along!
Move the microphone’s ON/OFF switch to the ON position and start singing!
To adjust the music volume: Use the volume controls on your phone.
To adjust the volume of music AND voice: Press and hold the + and —
buttons on the top of the speaker.
To play/pause the music: Press the button on the top of the speaker.
To skip to the next/previous track : Press the+ or — button on the top of
the speaker.
Using the Light Show
The Singsation Party Vibe has a light show that turns on when the speaker is on by default.
To turn off/on the speaker’s light show: Press and hold the button on the top of the speaker
Using Other Audio Sources
In addition to Bluetooth audio, the Singsation Party Vibe has four otheraudio sources you can use: FM radio, USB memory, SD card, and anauxiliary input.
To use FM radio: Press the M button on the top of the speaker. The
first time you use the FM radio, press the button on the top of the
speaker to scan available stations (this takes a few minutes to complete).
Then use the + and –
buttons to go to different radio stations
To use a USB memory stick or SD card: Plug the memory stick or SD
card into the USB or TF slots on the back of the speaker. If there are
music files in the top directory of the memory stick or SD card, the
speaker will automatically start playing them.
To use an auxiliary audio source : Plug your auxiliary audio source into
the AUX input on the back of the speaker using a 3.5 mm audio cable
(not included). The speaker automatically switches to the auxiliary input.
To return to Bluetooth audio: Start playback on your Bluetooth audio
source. Then press the M button on the top of the speaker repeatedly until
you hear the Bluetooth audio source. (You can also unplug all other audio
sources from the back of the speaker. The speaker will automatically switch
back to Bluetooth.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>