SINGSATION AURORA All-In-One Karaoke System User Guide
- June 12, 2024
- SINGSATION
Table of Contents
SINGSATION AURORA All-In-One Karaoke System User Guide
Unpack
Make sure the following items came in this package:
- Singsation Aurora All-In-One Karaoke System
- Microphone with Cable
- Charging Cable
- Remote Control
Charge the Speaker
Plug one end of the charging cable into the DC5V jack on the top of the speaker. Plug the other end into a USB charging adapter (not included).
The indicator light next to the DC5V jack turns red while the speaker is charging.
Plug In the Mic
Plug the microphone cable into the MIC jack on the top of the speaker.
Remove the Remote Battery Tab
Pull the battery tab out of the bottom of the remote. The battery will start powering the remote so you can use it.
Turn On the Speaker
Move the ON-OFF switch on the top of the speaker into the ON position. The
speaker announces “Pairing.”
Note: When the speaker’s ON-OFF switch is in the ON position, you can use
the remote’s button to turn the speaker on
Pair With the Speaker
Make sure your phone’s Bluetooth is turned on. Select Singsation SPKA28 from the available devices to pair to the speaker. The speaker announces “Device connected” when it’s finished pairing and connecting to your Bluetooth device.
Note: The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners manual for more information and specific instructions
If you’ve previously paired your phone or other Bluetooth device with the Singsation Aurora, it will automatically attempt to reconnect to that device when you switch it on. If you want to pair to a new device, turn off Bluetooth on the device that’s already paired to the speaker. The speaker announces “Pairing.”
Bluetooth Wireless Connection Tips
- Make sure the Bluetooth capability of your device is turned on.
- Make sure there’s nothing plugged into the Singsation Aurora’s AUX jack when you’re trying to use Bluetooth.
- The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re having problems connecting to the speaker, move closer to it.
- If your device asks you for a password to connect, use “0000”.
Start Playing Music
Turn your phone’s volume up to 75%. Then start playing music on your phone.
Turn On the Mic and Sing Along!
Move the microphone’s ON/OFF switch to the ON position and start singing!
To adjust the music volume: Use the volume controls on your phone.
To adjust the volume of music AND voice: Turn the VOL dial on the top of the speaker or the VOL– and VOL+ buttons on the remote.
To play/pause the music: Press the button on the top of the speaker or on the remote.
To skip to the next/previous track: Press the or button on the top of the speaker or on the remote.
If you have two Singsation Aurora speakers, you can set them up to play together in True Wireless Stereo. To set up True Wireless Stereo:
- Make sure both speakers are on.
- Give a quick double press to the /TWS button on one of the Singsation Auroras. Thespeaker plays a sound to indicate it’s ready for TWS pairing.
- Press and hold the /TWS button on the same speaker until you hear the speaker play a
second sound. The speakers are now in TWS mode.
To return to single-speaker mode: Turn one of the speakers off (or press and hold the /
TWS button on that speaker). Speakers return to TWS mode when they’re turned on again
Using the Light Show
The Singsation Aurora has several light show modes that turn on by default when the speaker is on. To cycle through the speaker’s light show modes: Press the button on the top of the speaker. The final press turns the light show off. Note: The light show does not support FM radio mode
Using Other Audio Sources
In addition to Bluetooth audio, the Singsation Aurora has four other audio sources you can use: FM radio, USB memory, SD card, and an auxiliary input.
To use FM radio: Press and hold the button on the top of the speaker. The first time you use the FM radio, press the button on the top of the speaker to scan available stations (this takes a few minutes to complete). Then use the or buttons to go to different radio stations.
To use a USB memory stick or SD card: Plug the memory stick or SD card into the USB or TF slots on the top of the speaker. If there are MP3 music files in the top directory of the memory stick or SD card, the speaker will automatically start playing them.
Note: The speaker offers additional functions for music playback from an SD card or USB memory stick. Press the EQ button on the remote to go through the different EQ settings (the name of each is shown on the display). Press the RPT button to repeat a track. These functions work for the USB memory stick or SD card only. To use an auxiliary audio source: Plug your auxiliary audio source into the AUX input on the top of the speaker using a 3.5mm audio cable (not included). The speaker automatically switches to the auxiliary input. To return to Bluetooth audio: Press and hold the button repeatedly until the display says “BT.”
Tour of the Singsation Aurora
Remote Control
turns the speaker on and off if the speaker’s ON-OFF switch is in the ON
position
Mode cycles through the speaker’s light show modes. Press and hold repeatedly to cycle through the speaker’s audio inputs. mutes the audio.
and play/pause, skip back, and skip forward for audio on the current input (except for AUX). EQ switches through the EQ presets for the SD card and USB inputs. The name of each preset is shown on the speaker’s display
VOL– and VOL+ adjust the volume of the speaker.
Number keys select a song directly on the TF and USB inputs.
RPT repeats the current song on the TF and USB inputs.
U/SD switches between the TF and USB inputs.
Speaker Top Panel
MIC jack Plug the included mic into this jack for karaoke!
AUX input Plug an auxiliary audio source into this jack via 3.5mm cable (not provided).
Display shows the current source and other information depending on the source (station for FM radio, EQ setting for USB and SD card, etc.).
TF slot and USB port Insert an SD card or USB memory stick into this slot or port to listen to the music on those media.
DC 5V jack Plug the included micro-USB charging cable into this jack. Then plug the other end into a USB power source to charge the speaker.
OFF-ON turns the speaker on and off. Leave this switch in the ON position to turn the speaker on and off using the remote. , , and play/pause, skip back, and skip forward for audio on the current input (except for AUX).
Speaker Top Panel
AUX input Plug an auxiliary audio source into this jack via 3.5mm cable (not provided).
Display shows the current source and other information depending on the source (station for FM radio, EQ setting for USB and SD card, etc.).
TF slot and USB port Insert an SD card or USB memory stick into this slot or port to listen to the music on those media.
DC 5V jack Plug the included micro-USB charging cable into this jack. Then plug the other end into a USB power source to charge the speaker.
OFF-ON turns the speaker on and off. Leave this switch in the ON position to turn the speaker on and off using the remote.
, , and play/pause, skip back, and skip forward for audio on the current input (except for AUX).
cycles through the speaker’s light show modes. Press and hold repeatedly to cycle through the speaker’s audio inputs.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>