SINGSATION MIC200 Wireless Mic User Guide
- June 12, 2024
- SINGSATION
Table of Contents
SINGSATION MIC200 Wireless Mic
Product Information
Wireless Mic
The Wireless Mic is a portable microphone system that allows you to sing or speak wirelessly without the need for a physical connection to your speaker. It includes a receiver and a microphone, both powered by batteries. The receiver is rechargeable via a micro-USB charging cable.
Package Contents
- Wireless Microphone
- Receiver
- Rechargeable battery
- Micro-USB charging cable
Receiver Features:
- ON/OFF switch with LED indicator
- DC 5V charging port
- RF indicator to show wireless connection status
Mic Features:
- ON/OFF switch with power indicator
- Battery compartment for 2 AA batteries (not included)
- MUTE switch for muting the microphone
Product Usage Instructions
Step 1: Unpack
Make sure the following items came in this package:
- Wireless Microphone
- Receiver
- Rechargeable battery
- Micro-USB charging cable
Step 2: Install the receiver’s rechargeable battery
Remove the battery door from the bottom of the receiver. Slide the battery door back in place.
Step 3: Charge the receiver
To charge the receiver:
- Plug the included micro-USB charging cable into the DC 5V charging port on the receiver.
- Plug the other end of the USB charging cable into a power source, like a computer or a USB charging adapter.
- The LED indicator on the front of the receiver is red while the receiver is charging. It turns off when the receiver is fully charged.
Step 4: Power the mic
Remove the battery cover from the back of the microphone. Insert 2 new AA batteries (not included). Then put the battery cover back in its place.
Step 5: Plug in the receiver
Plug the receiver into the microphone jack on your speaker. Move its switch to the ON position to turn it on. The LED indicator next to the switch turns green.
Note: If the receiver is turned on but the LED light has turned off, that means it’s time to recharge the receiver. Follow the instructions in step 3 to recharge.
Step 6: Turn on the mic
Move the mic’s switch to the ON position (the top position of the 3-position switch) to turn it on. The power indicator above the switch illuminates. The RF indicator on the receiver turns green when the mic and receiver are wirelessly linked and ready for use.
Note: If the mic is turned on but the indicator light has turned off, that means it’s time to change the mic’s batteries. Follow the instructions in step 4 to change them.
Step 7: Sing along!
Make sure the wireless mic and receiver are turned on. Start playing music on the device connected to your speaker and sing along!
To adjust the volume of your voice:
- Adjust the microphone volume on your speaker.
To adjust the volume of the music:
- Use the volume controls on your audio device.
To mute the mic:
- Move the ON/OFF switch on the mic to the middle position (MUTE)
INSTALLATION INSTRUCTION
Step 1: Unpack
- Make sure the following items came in this package.
Step 2: Install the receiver’s rechargeable battery
- Remove the battery door from the bottom of the receiver.
- Place the rechargeable battery in the battery compartment, matching the + and – indications.
- Slide the battery door back in place.
Step 3: Charge the receiver
- Before you start using the Wireless Mic for the first time, it’s a good idea to charge the receiver completely.
- To charge the receiver: Plug the included micro-USB charging cable into the DC 5V charging port on the receiver.
- Plug the other end of the USB charging cable into a power source, like a computer or a USB charging adapter.
- The LED indicator on the front of the receiver is red while the receiver is charging. It turns off when the receiver is fully charged
Step 4: Power the mic
- Remove the battery cover from the back of the microphone. Insert 2 new AA batteries (not included). Then put the battery cover back in its place.
Step 5: Plug in the receiver
- Plug the receiver into the microphone jack on your speaker. Move its switch to the ON position to turn it on. The LED indicator next to the switch turns green.
- Note: If the receiver is turned on but the LED light has turned off, that means it’s time to recharge the receiver.
- Follow the instructions in step 2 to recharge.
Step 6: Turn on the mic
- Move the mic’s switch to the ON position (the top position of the 3-position switch) to turn it on. The power indicator above the switch illuminates.
- The RF indicator on the receiver turns green when the mic and receiver are wirelessly linked and ready for use.
- Note: If the mic is turned on but the indicator light has turned off, that means it’s time to change the mic’s batteries. Follow the instructions in Step 3 to change them
Step 7: Sing along!
- Make sure the wireless mic and receiver are turned on. Start playing music on the device connected to your speaker and sing along!
- To adjust the volume of your voice: Adjust the microphone volume on your speaker.
- To adjust the volume of the music: Use the volume controls on your audio device.
- To mute the mic: Move the ON/OFF switch on the mic to the middle position (MUTE).
- © 2022 Voxx Accessories Corp.
- 3502 Woodview Trace, Suite 220
- Indianapolis, IN 46268
- www.SingsationKaraoke.com
- MIC200 NA QSG 02
Documents / Resources
|
SINGSATION MIC200 Wireless
Mic
[pdf] User Guide
MIC200 Wireless Mic, MIC200, Wireless Mic, Mic
---|---