belkin F1DN-RK10-4U Extender Rack Kit Installation Guide
- June 12, 2024
- belkin
Table of Contents
belkin F1DN-RK10-4U Extender Rack Kit Installation Guide
Objectives
-
Scan the QR code or visit Belkin Cybersecurity YouTube Playlist for Secure KVM Unboxing and Troubleshooting videos.
-
This guide includes instructions for Belkin F1DN-RK10-4U.
-
This Manual and additional product documentation is available for online download on Belkin website. For further assistance please refer to: https://www.belkin.com/products/product-resources/cybersecurity/resources/.
Pre-installation Guidelines
- Determine where you will mount the Rack Mount and the orientation of the Rack Mount.
- Ensure the Rack Mount will be installed on a flat, clean, and dry surface. This Rack Mount is not intended for exposed outdoor installation.
- Ensure that distance between the Extenders, PSU, Secure KVM/KM and each computer does not exceed cabling lengths or Extender supported distances.
- Ensure that once the Rack Mount is installed the Extender ports are accessible.
- F1DN-RK10-4U is compatible with the following Belkin Extenders:
- F1DN-KVM-EXTC6 Extender Transmitter Copper CAT6 – Universal Video (4K 60Hz 4X2X0)
- F1DN-KVM-EXRC6 Extender Receiver Copper CAT6 – Universal Video (4K 60Hz 4X2X0)
- F1DN-KVM-EXTC6X Extender Transmitter Copper CAT6 – Universal Video (4K 60Hz 4X4X4)
- F1DN-KVM-EXRC6X Extender Receiver Copper CAT6 – Universal Video (4K 60Hz 4X4X4)
- F1DN-KVM-EXTFI Extender Transmitter Fiber SFP – Universal Video (4K 60Hz 4X2X0)
- F1DN-KVM-EXRFI Extender Receiver Fiber SFP – Universal Video (4K 60Hz 4X2X0)
Package Contents
- F1DN-RK10-4U 10 Units Rack
- 10 Support Mounts
- 20 Screws to Rack Mount, Each Support Mount Requires 2 Screws
- 40 Screws for Mount, Each Extender Enclosure Requires 4 Screws
F1DN-RK10-4U Model is shown
- Verify that all peripherals and computers are turned OFF prior to connecting them to the product.
- Set Extender into Support Mount.
- Attach Extender to Support Mount using 4 included screws. Each Extender enclosure requires 4 screws to attach to Support Mount.
- Attach Support Mount to Rack Mount using 2 included screws. Each Support Mount requires 2 screws to attach to Rack Mount.
- Repeat steps 3 – 5 for all Extenders installed into Rack Mount.
Dimensions
- Rack Mount: 19 (W) x 6.25 (H) x 7 (D) inches / 482.6 (W) x 158.75 (H) x 177.8 (D) mm
- Mounting Brackets: 6.13 (W) x 4.38 (H) x 1.5 (D) inches / 155.70 (W) x 111.25 (H) x 38.1 (D) mm
- Weight: 3.90 lbs / 1.77 kg
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>