ONE FOR ALL URC1211 Essence TV Universal Remote Control User Manual
- June 12, 2024
- ONE FOR ALL
Table of Contents
ONE FOR ALL URC1211 Essence TV Universal Remote Control
Product Information
The Essence TV Universal Remote Control (URC1211) is a versatile remote control that can be used to operate various devices such as TVs, DVD players, and more. It requires 2 x AAA / LR03 batteries for operation. Alkaline batteries are recommended for optimal performance.
Product Usage Instructions
Battery Installation
- Open the battery compartment on the back of the remote# control.
- Insert 2 x AAA / LR03 batteries, ensuring correct polarity.
- Close the battery compartment securely.
CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Use quality Alkaline batteries.
Key Descriptions
| Key | Description |
|---|---|
| Power | Switches your devices on and off. |
| Setup | This key is used to set up the Essence remote. |
| Input | Used to select Input on devices. |
| Digits | Select channels on the current device. |
Setup using SimpleSet
- Turn on your device (not on standby) and point the Essence remote towards it.
- Hold down the Setup key until the LED under the Device key blinks twice.
- Hold down the digit for your brand and device as listed in the tables provided (e.g. 7 for a Samsung TV).
- The remote will send Power every 3 seconds until your device switches off.
- As soon as your device switches off, release the digit.
- The LED will blink twice and the remote should now operate your device.
Setup using Code List
- Turn on your device (not on standby) and point the Essence remote towards it.
- Hold down the Setup key until the LED under the Device key blinks twice.
- Enter the first 4 digit code listed for your brand (e.g. 1840 for LG).
- The LED will blink twice on the last digit of the code.
- Now aim the remote towards your device and press the Power key.
- If the device turns off, your remote is ready to use. If not, repeat steps 2-5 with the next code in the list.
BATTERIES
Your remote requires 2 x AAA / LR03 batteries. Please insert them as shown below. Alkaline batteries are recommended.
KEY DESCRIPTIONS
-
Power Switches your devices on and off.
-
Setup This key is used to set up the Essence remote.
-
Input Used to select Input on devices.
-
Digits Select channels on the current device.
-
TV Return to live TV.
-
Search Search for media.
-
Guide TV Guide.
-
Info Displays information about the current programs or channels.
-
Menu Access the installation menu of the current device.
Menu Directions and OK
Control the menu of the current device. -
Back one step in the Menu.
-
Exit Exits the menu.
-
Last Channel Changes to the last channel viewed.
-
Home Displays the Home Menu.
-
Volume Up and Down Control the volume of the current device.
-
Channel Up & Down
-
Change channels on the current device.
-
Mute Mutes the volume of the current device.
-
RGYB keys Quick access buttons for the menu of the current device.
-
Playback Keys Control the playback of movies, music and TV.
-
Subt. Display subtitles.
-
List Displays a list of recorded programs.
-
Apps Bring up the Applications menu on Smart Devices such as Smart TVs.
SETUP
SIMPLE SET
If the brand of your device is shown in the SimpleSet picture pointing to a
key, you can use the SimpleSet system described in this section, please locate
the brand of your device and note the key associated with it.
TV
To set up your device:
- Turn on your device (not on standby) and point the Essence remote towards it.
The remote will send Power every 3 seconds until your device switches off.- As soon as your device switches off, release the digit.
- The LED will blink twice and the remote should now operate your device.
If you find one or more keys do not work as you expect, start again at step 2 – the remote will start with the next code in the memory.
SETUP BY CODE
If the brand of your device is not listed in the SimpleSet feature, you can set it up by trying codes individually. To do this firstly locate your brand in the Code List. Codes are listed by brand and device and in order of popularity.
If the device turns off your remote is ready to use. If not, repeat steps 2-5 with the next code in the list.
LEARNING
Your Essence remote control can learn any function from any other working remote control. This is a quick and easy one-time setup that allows you to control any infrared-controlled device you have in your living room. It also allows you to add a key or keys that may be missing to a spare key on the Essence. To do this, firstly make sure you have all your original remote controls to hand, and that they have working batteries in. To learn functions, the original remote should be approximately 3cm from the Essence remote, pointing towards it:
- Hold down the Setup key until the LED under the device key blinks twice.
- Press 975 – the LED should blink twice.
- Press and release the key you want to learn a function onto (for example the TV Power key) – the LED will begin to flash rapidly.
- Press and release* the corresponding key on the original remote, for example, Power.
- The LED will blink twice to indicate the key has been learned correctly.
- Repeat steps 3 and 4 for each key you want to learn – remember you can learn from multiple remotes, but only one function per key.
- When you have learned all the functions you require, press and hold the Setup key until the LED blinks twice.
Some remotes send commands differently. If you find a function that cannot be learned, try holding down the key on the original remote instead of pressing and releasing it.
Hints
- If the LED shows one long blink at step 5, the function was not learned correctly, please try again from step 3.
- If you find one or more keys don’t work properly after set up, you can re-enter the learning mode at any time by repeating the procedure from step 1.
- If one or more of your original remotes aren’t working, you can still set up the Essence remote by SimpleSet or Code Set Up.
Deleting a learned function
If you want to delete a learned function and return the keys to its original
state, you can use the following procedure:
- Hold down the Setup key until the LED under the device key blinks twice.
- Press 976 – the LED should blink twice
- Press the key you want to reset twice – the LED should blink twice and the learned function has been deleted.
PRODUCT DISPOSAL (EUROPEAN DIRECTIVE 2012/19/EU)
The crossed-out wheeled bin symbol on this product ensures that this product is manufactured using high-quality components that can be recycled and reused according to European Directive 2012/19/EU. Please do not dispose of this product with your normal household waste, refer to local regulations for the proper collection or disposal of electrical and electronic products. This will help in preventing negative effects on the environment and/or human health.
BATTERY DISPOSAL (EUROPEAN DIRECTIVE 2006/66/EC)
Please do not dispose of your batteries with your normal household waste,
refer to local regulations for the proper collection or disposal. This will
help prevent potential negative effects on the environment and/or human
health.
GUARANTEE TERMS AND CONDITIONS UNIVERSAL ELECTRONICS warrants to the
original purchaser that this product will be free from defects in materials
and workmanship under normal and correct use for a period of 3 years from the
date of original purchase. This product will be repaired or if necessary,
replaced free of charge if it has been proven to be defective within the
3-year warranty period. The forwarding costs are on the account of the owner;
the
costs of returning the product are on the account of UNIVERSAL ELECTRONICS.
This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL ELECTRONICS, or which result from not mounting the product according to manual instructions. This also applies when the product has been modified/repaired by others than UNIVERSAL ELECTRONICS or if a fault is the result of an accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, improper maintenance, alteration, modifications, fire, water, lightning, natural disasters, wrong use, or carelessness. To obtain warranty service during the warranty period contact […], and please note that we need your original purchase receipt so that we may establish your eligibility for service. If you have bought this product for purposes that are not related to your trade, business, or profession, you may have legal rights under your national legislation governing the sale of consumer goods. This guarantee does not affect those rights. www.oneforall.com
Connect with us
Universal Electronics BV
Europe & International
P.O. Box 3332, 7500 DH Enschede
The Netherlands
References
- Home | One For All
- Call Center: outsourcing telemarketingu i obsługi klienta | ContactCenter
- Web Server's Default Page
- EMOS - drobné elektro pro vás | Nakupujte výhodně | EMOS
- Világítástechnikai és elektronikai eszközök webáruháza | EMOS.hu
- EMOS - drobné elektro pre vás | Nakupujte výhodne | EMOS.sk
- Home | One For All
- Tehnocentar
- Смарт аксесоари за телефони и таблети - SmartStyle
- EMOS kakovostni električni izdelki | EMOS - Slovenija