NEXIGO P5133 PS5 Wall Mount with Dual Charging Station User Manual
- June 12, 2024
- NEXIGO
Table of Contents
NEXIGO P5133 PS5 Wall Mount with Dual Charging Station
Product Information
- Product Name: PS5 Wall Mount with Dual Charging Station
- Model Number: P5133
- Manufacturer: Nexight INC
- Website: www.nexigo.com
Contact Information:
- Email: cs@nexigo.com
- Phone: +1(458) 215-6088
- Address: 11075 SW 11th St, Beaverton, OR, 97005, US
Product Details
- Charging Slot 1
- LED Indicator
- Type-C Power Interface
- Power Button
- Charging Dock
- Charging Slot 2
- Wall Mount
Product Usage Instructions
Step 1: Install the Wall Mount
1a. Align one of the U-shaped spacers with the holes on the base of the
wall mount. Insert a screw through one of the holes in the U-shaped spacer and
fasten it with a washer on the other side. Repeat this process with the other
screw.
1b. Install the other U-shaped spacer using the same method as described in
step 1a.
Step 2: Mark and Drill Holes
Position the wall mount where you want it and mark each hole with a pencil
or pen to ensure accuracy. Drill a hole at each mark using a 15/64 drill bit.
Step 3: Insert Plastic Wall Plugs
Insert a plastic wall plug into each hole and hammer them in until they are
nearly flush with the wall surface.
Step 4: Mount the Wall Mount
Insert a screw through each hole in the wall mount and into the plastic wall
plug. Tighten the screws snugly, taking care not to overtorque or strip the
screw heads.
Step 5: Attach the PS5 Console
Place your PS5 console on the wall mount and align its safety lock screw
hole with the opening on the bottom of the mount. Insert the safety screw and
tighten it.
Step 6: Connect and Power the Charging Dock
Place the charging dock in the slot in front of the PS5 console.
You can power the charging dock using either the provided USB cable or power
adapter.
Step 7: Toggle On/Off the Charging Dock
Tap the power button on the charging dock to toggle it on/off.
Please ensure that the power button is turned on and lit up before charging,
as the controllers will not charge if it is off.
Note: For detailed installation instructions, please refer to the user manual or installation video provided.
Product Features
- An intelligent microchip protects controllers from damage and displays an easy-to-read charging status.
- The charging station can charge two PS5 controllers simultaneously.
- The LED indicator light displays an orange hue while charging and changes to a blue light when the controller is fully charged.
- Minimalistic aesthetic for convenience and adaptability.
User Manual 
Installation Video
WELCOME TO THE NEXIGO FAMILY!
Thank you for choosing the NexiGo PS5 Wall Mount with Dual Charging
Station! You are now part of an exclusive club: the NexiGo family! It’s our
job to make sure you enjoy your membership. If you have any problems please
contact us at cs@nexigo.com at any time for further
assistance. This product is covered by our industry leading 1-year
manufacturers warranty. Make sure to register your purchase at
nexigo.com/warranty within 14 days of the
delivery date to extend your warranty coverage to TWO Years!
From all of us here at NexiGo, we want to welcome you again to the family. We
thank you deeply for your trust and for your business. We know you’ll love it
here. We look forward to serving you again in the near future.
Yours Sincerely,
The NexiGo Team
CONTACT INFORMATION
- Website: www.nexigo.com
- Manufacturer: Nexight INC
- E-mail: cs@nexigo.com
- Tel: +1(458) 215-6088
- Address: 11075 SW 11th St, Beaverton, OR, 97005, US
PRODUCT INTRODUCTION
This PS5 Wall Mount with Dual Charging Station is designed to organize your
PS5 console and can support both Digital and Disc versions. The wall mount is
equipped with a 5V 2A power adapter to provide faster charging. The LED
indicators on the charging station will provide an easy-to-read status on your
controller’s charging status, displaying an orange light when they are
charging and a blue light when they are fully charged.
PRODUCT DETAILS
- Charging Slot 1
- LED Indicator
- Type-C Power Interface
- Power Button
- Charging Dock
- Charging Slot 2
- Wall Mount
PRODUCT INSTRUCTIONS
Step 1: Align one of the U-shaped spacers with the holes on the base of the wall mount. Insert a screw through one of the holes in the U-shaped spacer and fasten it with a washer on the other side. Repeat this process with the other screw, and then repeat the process with the other U-shaped spacer. Ensure that both U-shaped spacers are installed before moving on to Step 2.
Step 2: Position the stand where you want it and then locate the screw holes in the wall mount. Mark each hole with a pencil/pen to ensure that the tapping process will be accurate.
Step 3: Drill a hole with 15/64″ drill bit at each mark. (Drill and drill bits NOT included.)
Step 4: Insert a plastic wall plug into each hole and hammer in the plastic wall plugs so they are nearly flush with the wall surface. (Hammer NOT included.)
Step 5: Insert a screw through the hole in the wall mount and into the plastic wall plug, then do the same with the rest holes in the wall mount. Tighten screws snugly, being careful not to overtorque or strip the screw heads.
Step 6: Place your PS5 console on the wall mount and align its safety lock screw hole with the opening on the bottom of the mount. There are two openings for the screw placement, one for each version of the console. Once you have aligned the PS5 screw hole with the opening on the bottom of the mount, insert the safety screw and tighten it.
Step 7: Place the charging dock in the slot in front of the PS5 console. You can power the charging dock with either the provided USB cable or power adapter.
Step 8: Tap the power button to toggle on/off the charging dock (Note: Please ensure that the power button is turned on and lit up before charging. The controllers will not charge if it is off.)
FEATURES
- An intelligent microchip within the charger protects the controllers from damage and displays an easy-to-read charging status.
- Can charge two PS5 controllers simultaneously.
- The LED charge indicator light displays an orange hue while charging a connected controller. This indicator changes to a blue light when the controller is fully charged.
- Minimalistic aesthetic for convenience and adaptability.
CHARGING INSTRUCTIONS
- Power the charging dock with either the provided USB cable or the provided power adapter.
- A white power indicator light will display in the lower left hand corner of the dock next to the power button when the dock is on. Tap the power button to power on the charging dock. This will cause the logo at the center to illuminate and will cause both charging indicators to flash orange and blue.
Note: The power button is a touch controlled button and can be toggled on/off with a simple tap.
SPECIFICATIONS
- Input: DC 5V 2A
- Output: DC 5V 1.5A
- Charging Time: ~2.5 Hours
- LED Indicator: Orange (Charging), Blue (Fully Charged)
- Product Size: 10.16 X 1.97 X 2.28 Inches
WHAT’S IN THE BOX?
- 1 X PS5 Controller Charging Dock
- 2 x U-Shaped Spacers
- 1 X Screwdriver
- 1 X USB Cable
- 1 X PS5 Wall Mount
- 1 X Screws Bag
- 1 X User Manual
- 1 X Adapter
NOTES
- SAFETY WARNING: HAZARD-Small Parts-Not intended for children under 5 years of age.
- Power the charging dock with either the provided USB cable or the provided power adapter. Other Type-C power supplies may cause charging failure or extended charging duration.
- To ensure longevity and lifespan of the wall mount do not place any objects other than the console or accessories on the wall mount. Keep this product dry.
- This product cannot be used and/or stored in high humidity conditions.
- When this unit is not in use or when docked controllers are fully charged, it is recommended that you unplug it from the power source.
FCC REQUIREMENT
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>