infobit iTrans-USB2-TR100 USB 2.0 Extender User Manual
- June 12, 2024
- infobit
Table of Contents
USER MANUAL
iTrans
USB 2.0 Extender (100M)
Model: iTrans-USB2-TR100
Introduction
The USB 2.0 Extender can extend USB signal up to 100 meters / 328ft via Cat 5e/6 cable. In transmitter, the USB-B port is connected a PC. In receiver, you can connect a device with USB port at the two USB ports such as U disk or printer, etc. Transmitter and Receiver support PoC (Power over Cable) function. The product can be widely used long distance signal transmission between a PC and USB device. Simple plug and play, no drive and setting installation required.
Features
Supports USB 2.0 protocol, transmission rate up to 480Mbps
Supports extend distance up to 100 meters / 328ft via CAT 5e/6 cable
Supports one USB-B port input in the transmitter
Supports two USB 2.0 ports output in receiver
Supports the PoC function, which means that either transmitter or receiver is
connected powered supply by a 12V/1A power adapter
Simple plug and play, no drive and setting installation required
Compact design for easy and flexible installation
Package Contents
- 1× USB 2.0 Extender (Transmitter)
- 1× USB 2.0 Extender (Receiver)
- 1× USB cable (USB-B male head to USB-A male head, one meter )
- 1× 12V/1A Locking Power Adapter
- 1× User Manual
Specifications
Technical
USB protocol| USB 2.0
Transmission rate| Up to 480Mbps
Transmission distance| 100M (328ft)
ESD Protection| Human-body Model : ±8kV (Air-gap discharge) , ±4kV (Contact
discharge)
Connections
Transmitter| Input port: 1xUSB [USB-B, female] Output port: 1xCAT [12145,
female]
Receiver| Input port: 1xCAT [11145, female] Output port: 2xUSB [USB-A, female]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter / Receiver: 82mm (W)x49mm (D)x20mm (H)
Weight| Transmitter / Receiver: 100g
Power Supply| Input: AC100-240V 50/60Hz, Output: DC 12V/1A
Power Consumption| Transmitter: 1.3W, Receiver: 2.3W
Operating Temperature| 0 C∼40 C/32 F ∼104 F
Storage Temperature| -20 C∼ 60 C / -4 F ∼140 F
Relative Humidity| 2090% RH (non-condensing)
Operation Controls and Functions
5.1 Front Panel
| Number | Name | Function description |
|---|---|---|
| 1 | USB port | Use USB-B male head to USB-A male head wire to connect USB port |
of a PC.
Note: The PC can control USB ports’ device of the
receiver.
2| POWER LED| Power LED indicator. The green LED will illuminate when
transmitter is provided power supply.
3| DC 12V| Plug DC 12V/1A power supply into the unit and connect the adapter
to an AC outlet.
4| CAT port| The CAT port is connected receiver’ s CAT port by CAT
5e/6 cable.
5.2 Rear Panel
| Numbe | Name | Function description |
|---|---|---|
| 1 | USB 2.0 port | Connect to a device with USB port such as printer or U disk, |
etc.
2| POWER LED| Power LED indicator. The green LED will illuminate when
the receiver is connected power supply.
3| DC 12V| Plug 12V/1A DC power supply into the unit and connect
the adapter to an AC outlet.
4| CAT port| The CAT port is connected transmitter’s CAT port by CAT
5e/6 cable.
Connection diagram
INFOBIT AV
info@infobitav.com
www.infobitav.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>