infobit iTrans W100 HDMI Wireless Extender with One Way IR User Manual
- June 12, 2024
- infobit
Table of Contents
iTrans W100
HDMI Wireless Extender with
One-way IR (100m)
User Manual
VER 1.0
www.infobitav.com
info@infobitav.com
iTrans W100 HDMI Wireless Extender with One Way IR
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Introduction
This product is based on H.265 standard solution for transmitting one HD source signal to one HD display. It extends distance up to 330ft/100 meters (In an open environment without Wi-Fi interference) between the encoder and decoder via wireless transmission. It supports one-way IR control. It offers high quality configurable and low-bandwidth H.265 compression video. Input video resolution is up to 1920×1080@60Hz; Output video resolution is up to 1080P@60Hz. This wireless extender is designed special to transmit high definition video & audio within one environment.
Features
☆ HDMI 1.3, HDCP 1.4 and DVI 1.0 compliant
☆ Transmit one HDMI HD source signal to one HDMI HD display via wireless
technology
☆ With one-way IR control
☆ Input video resolution is up to 1920×1080@60Hz YCbCr 4:4:4; Output video
resolution is up to 1080P@60Hz YCbCr 4:4:4
☆ HDMI wireless transmission distance up to 330ft/100m. (In an open
environment without Wi-Fi interference.)
☆ Supported HDMI audio formats:
Input: LPCM 2.0CH 32KHz/44.1KHz/48KHz/88.2KHz/96KHz/176.4KHz/192KHz
Output: LPCM 2.0CH 48KHz
☆ Adopt H.265 high performance codec technology
☆ End-to-end delay is less than 120Ms
☆ Compact design for easy and flexible installation.
Package Contents
| Qty | Item |
|---|---|
| 1 | HDMI Wireless Extender (Encoder) |
| 1 | HDMI Wireless Extender (Decoder) |
| 1 | IR Blaster cable (1.5 meters) |
| 1 | 20~60KHz IR Receiver cable (1.5 meters) |
| 4 | 5G WiFi Antenna |
| 2 | 5V/2A Multinational Power Supply |
| 1 | User Manual |
Specifications
Technical
HDMI Compliance| HDMI 1.3
HDCP Compliance| HDCP 1.4
Video Bandwidth| 4.95Gbps
Video Resolution| Input: Up to 1920×1080@60Hz
Output: Up to 1080P@60Hz
Color Space| RGB, YCbCr 4:4:4 / 4:2:2
Color Depth| 8/10/12-bit (1080P@60Hz)
HDMI Audio Formats| Input: LPCM 2.0CH
32KHz/44.1KHz/48KHz/88.2KHz/96KHz/176.4KHz/192KHz
Output: LPCM 2.0CH 48KHz
ESD Protection| Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact
discharge)
Connection
Encoder| Inputs: 1x HDMI IN [Type A, 19-pin female] Outputs: 1x IR OUT
[3.5mm Stereo Mini-jack] 2x WiFi OUT [WiFi antenna] Control: 1x SERVICE
[Micro USB, Update port]
Decoder| Inputs: 1x IR IN [3.5mm Stereo Mini-jack] 2x WiFi IN [WiFi
antenna] Outputs: 1x HDMI OUT [Type A, 19-pin female] Control: 1x SERVICE
[Micro USB, Update port]
Mechanical
Housing| Plastic Enclosure
Dimensions| Black
Color| Encoder / Decoder: 76mm [W] x 98mm [D] x 21mm [H]
Weight| Encoder / Decoder: 100g
Power Supply| Input: AC100 – 240V 50/60Hz
Output: DC 5V/2A
Power Consumption| Encoder: 5.6W, Decoder: 2.65W (Max)
Operating Temperature| 32 – 104°F / 0 – 40°C
Storage Temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (no condensation)
Resolution /Cable Length| 1080P60Hz -Feet / Meters
HDMI IN / OUT| 42ft / 15M
The use of “Premium High Speed HDMI” cable is highly recommended.
Operation Controls and Functions
5.1 Encoder Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | Power LED | The LED will illuminate red when the encoder is powered on. |
| 2 | LINK LED (Green) | The LINK LED flashing means that the encoder and decoder |
are paired successfully. (Please refer to “5.3 Pairing Instruction” for
details)
3| HDMI IN| HDMI source input port for connecting the HDMI source device.
4| DC 5V| Connect the DC 5V/2A power adapter.
5| PAIR button| Press and hold the PAIR button, then power on the encoder, the
device will enter the upgrade mode.
6| SERVICE port| Firmware update port.
7| IR OUT| Connect the IR blaster cable. The IR blaster signal is from the IR
IN port on the Decoder.
8| Antenna port| Connect the WiFi antenna.
5.2 Decoder Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | Power LED | The LED will illuminate red when the encoder is powered on. |
| 2 | LINK LED (Green) | The LINK LED flashing means that the encoder and decoder |
are paired successfully. (Please refer to “5.3 Pairing Instruction” for
details)
3| HDMI OUT| HDMI output port for connecting the HDMI display device.
4| DC 5V| Connect the DC 5V/2A power adapter.
5| PAIR button| Press and hold the PAIR button, then power on the decoder, the
device will enter the upgrade mode.
6| SERVICE port| Firmware update port.
7| IR IN| Connect the IR receiver cable. The IR signal is sent to the IR OUT
port on the encoder.
8| Antenna port| Connect the WiFi antenna.
5.3 Pairing Instruction
Follow steps below to pair the encoder and decoder:
Step 1, Connect the encoder and decoder with an HDMI cable.
Step 2, Power on the decoder, then the power LED and LINK LED of the decoder
will be always on.
Step 3, Power on the encoder. After successful pairing, the LINK LED of the
decoder will flash. (If the pairing fails, return to Step 2.)
If the LINK LED of encoder is always on, it indicates that the encoder and
decoder has not been connected or paired. When there is video signal
transmission, the LINK LED of decoder will flash; When there is no video
signal transmission, the LINK LED of decoder will be always on.
The specific instructions are shown in the following table.
Encoder’s LINK LED status (Green)| Decoder’s LINK LED status
(Green)| Description
---|---|---
Always on| Always on| The encoder and decoder are not paired or connected.
Flash| Always on| Successful pairing.
Flash| Flash| The encoder and decoder are paired successfully, and there is
video signal transmission.
5.4 IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
Connection diagram of using IR cables.
Application Example
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>